F5F Stay Refreshed Hardware Desktop High-performance processor with excellent heat management.

High-performance processor with excellent heat management.

High-performance processor with excellent heat management.

T
the5harkman
Senior Member
542
01-06-2020, 12:13 PM
#1
I upgraded to 5600x from fx6300 to run modern games smoothly. However, I see temperatures rising above 90 degrees. The stock cooler wraith stealth is working, but I’m wondering if there’s a way to adjust the settings or if an aftermarket air cooler would be better. Thanks!
T
the5harkman
01-06-2020, 12:13 PM #1

I upgraded to 5600x from fx6300 to run modern games smoothly. However, I see temperatures rising above 90 degrees. The stock cooler wraith stealth is working, but I’m wondering if there’s a way to adjust the settings or if an aftermarket air cooler would be better. Thanks!

T
TIMidator75
Junior Member
38
01-06-2020, 12:39 PM
#2
Case: Specific model details not provided
Number of cases: Unknown
Location: Not specified
GPU: Not mentioned
Motherboard: PSU information absent
T
TIMidator75
01-06-2020, 12:39 PM #2

Case: Specific model details not provided
Number of cases: Unknown
Location: Not specified
GPU: Not mentioned
Motherboard: PSU information absent

D
Darkeos
Senior Member
538
01-22-2020, 08:23 AM
#3
model: cm 690ii first gen mobo, b450 pro vdh, max gpu 1660, supersync psu seasonic gx750, case fans 3 intake (side, bottom, front), 3 outtake (2 top, 1 back), room temp ~20-21°C
D
Darkeos
01-22-2020, 08:23 AM #3

model: cm 690ii first gen mobo, b450 pro vdh, max gpu 1660, supersync psu seasonic gx750, case fans 3 intake (side, bottom, front), 3 outtake (2 top, 1 back), room temp ~20-21°C

I
136
01-22-2020, 11:31 AM
#4
The stock cooler isn't great, but it's not uncommon. I suggest upgrading to a larger one. What cooler did you use with your FX 6300?
I
iIPotatoChipIi
01-22-2020, 11:31 AM #4

The stock cooler isn't great, but it's not uncommon. I suggest upgrading to a larger one. What cooler did you use with your FX 6300?

J
james26665
Senior Member
537
01-22-2020, 01:37 PM
#5
Unfamiliar with 5600X, but 5700G and over 80 were typical for every tough game with the stock cooler. Around 90 was standard for benchmarks like Cinebench. Any good cooler is better than the original.
J
james26665
01-22-2020, 01:37 PM #5

Unfamiliar with 5600X, but 5700G and over 80 were typical for every tough game with the stock cooler. Around 90 was standard for benchmarks like Cinebench. Any good cooler is better than the original.

G
GangsterBoss
Junior Member
26
01-22-2020, 04:18 PM
#6
Check the specifications for each game to find its CPU temperature.
G
GangsterBoss
01-22-2020, 04:18 PM #6

Check the specifications for each game to find its CPU temperature.

A
AdamKoudy
Senior Member
740
01-23-2020, 07:53 AM
#7
oh really, i thought that stock wraith cooler is a decent cooler for a freebie one. My previous cooler for my fx6300 is deepcool gammaxx400. Although i donate it already to my cousin in the province. If I am going to buy one, is the NH-L9x65 is a good cooler? Or any other recommendation on around $50, thanks!
A
AdamKoudy
01-23-2020, 07:53 AM #7

oh really, i thought that stock wraith cooler is a decent cooler for a freebie one. My previous cooler for my fx6300 is deepcool gammaxx400. Although i donate it already to my cousin in the province. If I am going to buy one, is the NH-L9x65 is a good cooler? Or any other recommendation on around $50, thanks!

T
TreeZZ_
Junior Member
5
02-08-2020, 03:07 PM
#8
Observe the results and check across Tekken 7, SFV, Neverwinter Nights ee, and Halo Aniv. It sits near 80–90, whereas Cyberpunk is about 90–97.
T
TreeZZ_
02-08-2020, 03:07 PM #8

Observe the results and check across Tekken 7, SFV, Neverwinter Nights ee, and Halo Aniv. It sits near 80–90, whereas Cyberpunk is about 90–97.

S
sebpet09
Junior Member
31
02-08-2020, 05:40 PM
#9
Absolutely, the stock hockey puck is pretty bad. Heat pipes would definitely improve things. I didn’t use the original one with my board, but I did try the one with my 3600XT—it was thicker. I was hoping for an AM4 cooler mount, and with the heat rising this summer, it’s hard to keep things cool. I really don’t want the CPU overheating.
S
sebpet09
02-08-2020, 05:40 PM #9

Absolutely, the stock hockey puck is pretty bad. Heat pipes would definitely improve things. I didn’t use the original one with my board, but I did try the one with my 3600XT—it was thicker. I was hoping for an AM4 cooler mount, and with the heat rising this summer, it’s hard to keep things cool. I really don’t want the CPU overheating.