F5F Stay Refreshed Hardware Desktop High 5600x idle temperatures

High 5600x idle temperatures

High 5600x idle temperatures

S
SilverGP
Junior Member
16
04-29-2020, 02:59 AM
#1
Hey everyone, I just switched from an old Haswell CPU to the 5600x but my idle temps are way up, usually between 55-65°C. That’s much higher than my old CPU’s 30-40°C idle range. I’m using a Noctua NH-U12S cooler and double-checked it’s properly seated. Any tips or advice would be great!
S
SilverGP
04-29-2020, 02:59 AM #1

Hey everyone, I just switched from an old Haswell CPU to the 5600x but my idle temps are way up, usually between 55-65°C. That’s much higher than my old CPU’s 30-40°C idle range. I’m using a Noctua NH-U12S cooler and double-checked it’s properly seated. Any tips or advice would be great!

K
kerem_
Member
204
04-29-2020, 05:08 AM
#2
Is it really that loud? The fan is definitely running. How's the airflow looking right now?
K
kerem_
04-29-2020, 05:08 AM #2

Is it really that loud? The fan is definitely running. How's the airflow looking right now?

M
Mizotuaka
Junior Member
3
04-29-2020, 12:22 PM
#3
This behavior is typical for Ryzen processors—they tend to perform better with at least one or two cores running at full capacity, which can cause quick temperature increases. What are your current load temperatures?
M
Mizotuaka
04-29-2020, 12:22 PM #3

This behavior is typical for Ryzen processors—they tend to perform better with at least one or two cores running at full capacity, which can cause quick temperature increases. What are your current load temperatures?

M
mcfarter
Member
178
04-29-2020, 01:33 PM
#4
I’d probably disagree unless the airflow inside the case is extremely poor. The NH-U12S should stay under 50°C during Windows tasks. A brief rise to 55°C is acceptable, but it shouldn’t be a steady high like that.
M
mcfarter
04-29-2020, 01:33 PM #4

I’d probably disagree unless the airflow inside the case is extremely poor. The NH-U12S should stay under 50°C during Windows tasks. A brief rise to 55°C is acceptable, but it shouldn’t be a steady high like that.

O
OnGameStation2
Junior Member
20
04-29-2020, 09:12 PM
#5
The 5600X tends to get quite warm, making it challenging to move all the heat away. On my custom loop, temperatures usually sit between the mid-30s and mid-40s with coolant around 25-30°C. High idle temps stay steady since the CPU is rarely truly off. When I power down everything and place it on the desk, it drops to about 2-3°C below the coolant. Activating VPN or launching programs raises the reading. I checked CB23 for 30 minutes today and it peaked at roughly 65°C, even with PBO/AutoOC enabled. That’s the benchmark I’m using.
O
OnGameStation2
04-29-2020, 09:12 PM #5

The 5600X tends to get quite warm, making it challenging to move all the heat away. On my custom loop, temperatures usually sit between the mid-30s and mid-40s with coolant around 25-30°C. High idle temps stay steady since the CPU is rarely truly off. When I power down everything and place it on the desk, it drops to about 2-3°C below the coolant. Activating VPN or launching programs raises the reading. I checked CB23 for 30 minutes today and it peaked at roughly 65°C, even with PBO/AutoOC enabled. That’s the benchmark I’m using.

R
randomabby
Senior Member
476
04-30-2020, 09:41 AM
#6
Completed a 20-minute stress test with 3D Mark, reaching the maximum temperature of 71°C.
R
randomabby
04-30-2020, 09:41 AM #6

Completed a 20-minute stress test with 3D Mark, reaching the maximum temperature of 71°C.

R
Rexty_
Senior Member
568
04-30-2020, 11:54 AM
#7
Sure, I can run CB. Just let me know your situation and how the intake and exhaust fans are arranged.
R
Rexty_
04-30-2020, 11:54 AM #7

Sure, I can run CB. Just let me know your situation and how the intake and exhaust fans are arranged.

T
td0703
Member
177
05-01-2020, 08:18 PM
#8
Running a Define R6 setup with three Noctua NF-P14s—two front and one rear.
T
td0703
05-01-2020, 08:18 PM #8

Running a Define R6 setup with three Noctua NF-P14s—two front and one rear.

I
iouiou70_
Member
61
05-02-2020, 04:49 AM
#9
I had some trouble with my 5800x. The paste I purchased seemed to be the problem. Coming from an Intel chip, it confused me about why my thermal readings were higher than expected. After applying the new paste and checking again, I’m still in the 25 to 30°C range. It’s still a bit puzzling. Ryzen processors tend to heat up quickly, but they never exceed 60°C. I’m wondering if the paste issue might still be present. Could this be typical behavior?
I
iouiou70_
05-02-2020, 04:49 AM #9

I had some trouble with my 5800x. The paste I purchased seemed to be the problem. Coming from an Intel chip, it confused me about why my thermal readings were higher than expected. After applying the new paste and checking again, I’m still in the 25 to 30°C range. It’s still a bit puzzling. Ryzen processors tend to heat up quickly, but they never exceed 60°C. I’m wondering if the paste issue might still be present. Could this be typical behavior?