F5F Stay Refreshed Hardware Desktop Hi… new problem with 12th gen cpu

Hi… new problem with 12th gen cpu

Hi… new problem with 12th gen cpu

M
mat_fram
Posting Freak
776
08-31-2021, 06:35 AM
#1
Hey, cinebench23 is displaying this error screen again. On UserBenchmark it shows I’m missing CPU power. It’s a brand new Windows 11 system with a new i5 12600K that’s overclocked to 5GHz P cores 4GHz E cores at 1.250V, and it worked before, so the issue isn’t with the OS.
M
mat_fram
08-31-2021, 06:35 AM #1

Hey, cinebench23 is displaying this error screen again. On UserBenchmark it shows I’m missing CPU power. It’s a brand new Windows 11 system with a new i5 12600K that’s overclocked to 5GHz P cores 4GHz E cores at 1.250V, and it worked before, so the issue isn’t with the OS.

S
soren550
Member
51
08-31-2021, 03:14 PM
#2
No, removing the OC does not eliminate the error.
S
soren550
08-31-2021, 03:14 PM #2

No, removing the OC does not eliminate the error.

E
Ebaar
Junior Member
35
09-15-2021, 02:35 PM
#3
The OC isn't holding up well; you haven't pushed it through enough stress tests. It might just be that today was a bit warmer than when you first created it—that could be the issue.
E
Ebaar
09-15-2021, 02:35 PM #3

The OC isn't holding up well; you haven't pushed it through enough stress tests. It might just be that today was a bit warmer than when you first created it—that could be the issue.

I
Itzsonzy
Member
172
09-29-2021, 06:59 AM
#4
However, the performance was extremely poor, significantly worse than expected.
I
Itzsonzy
09-29-2021, 06:59 AM #4

However, the performance was extremely poor, significantly worse than expected.

T
TigreG0D
Member
68
09-29-2021, 03:44 PM
#5
It's not that chilly in Norway, but I managed to run at 5.2ghz without any issues before.
T
TigreG0D
09-29-2021, 03:44 PM #5

It's not that chilly in Norway, but I managed to run at 5.2ghz without any issues before.

T
Trentqn
Member
150
09-29-2021, 07:00 PM
#6
Adjust to 5.0 and observe the issue disappear, it's your overclock.
T
Trentqn
09-29-2021, 07:00 PM #6

Adjust to 5.0 and observe the issue disappear, it's your overclock.

S
silvertooth98
Member
181
10-10-2021, 08:50 AM
#7
Lower your clock speed by 200 MHz and observe if the issue resolves. If it does, the answer is clear.
S
silvertooth98
10-10-2021, 08:50 AM #7

Lower your clock speed by 200 MHz and observe if the issue resolves. If it does, the answer is clear.

A
a1k2
Member
53
10-12-2021, 04:05 AM
#8
Will try
A
a1k2
10-12-2021, 04:05 AM #8

Will try

A
Avichi
Member
73
10-12-2021, 05:25 AM
#9
the processor needs to handle speeds above 5 gigahertz
A
Avichi
10-12-2021, 05:25 AM #9

the processor needs to handle speeds above 5 gigahertz