F5F Stay Refreshed Hardware Desktop Hey everyone, CPU temperature issue.

Hey everyone, CPU temperature issue.

Hey everyone, CPU temperature issue.

_
_Jay21_
Member
63
01-05-2023, 03:59 AM
#1
Isn't this low temperature for idle? What can I do to improve it? It's connected to the pump on the motherboard. I have 10x fans—3 side intakes and 3 bottom intakes, plus a top exhaust with three radiators and a back exhaust with one full spec.
_
_Jay21_
01-05-2023, 03:59 AM #1

Isn't this low temperature for idle? What can I do to improve it? It's connected to the pump on the motherboard. I have 10x fans—3 side intakes and 3 bottom intakes, plus a top exhaust with three radiators and a back exhaust with one full spec.

A
Andy_206
Member
58
01-13-2023, 08:07 AM
#2
I’d handle it by shutting off the PC and checking the CPU cooler. If your fans are quiet, tweak the fan curve settings. For better accuracy, consider using HWiNFO64 and download the free installer.
A
Andy_206
01-13-2023, 08:07 AM #2

I’d handle it by shutting off the PC and checking the CPU cooler. If your fans are quiet, tweak the fan curve settings. For better accuracy, consider using HWiNFO64 and download the free installer.

A
achoo_ca
Member
69
01-16-2023, 01:26 PM
#3
The focus should be on how load temperatures behave. Idle periods vary widely and often aren't as significant as actual operating temperatures.
A
achoo_ca
01-16-2023, 01:26 PM #3

The focus should be on how load temperatures behave. Idle periods vary widely and often aren't as significant as actual operating temperatures.

T
Texas1047
Posting Freak
889
01-16-2023, 05:20 PM
#4
It looks like everything is within an acceptable range. A reading of 52 is typical. If you're concerned, consider setting your maximum CPU speed in the BIOS to around 4 GHz or a bit lower than the default turbo settings to lower temperatures without sacrificing performance.
T
Texas1047
01-16-2023, 05:20 PM #4

It looks like everything is within an acceptable range. A reading of 52 is typical. If you're concerned, consider setting your maximum CPU speed in the BIOS to around 4 GHz or a bit lower than the default turbo settings to lower temperatures without sacrificing performance.

T
TheRealVaxor69
Member
200
01-23-2023, 11:03 AM
#5
It's actually normal for CPUs to experience slight spikes even at low loads. They're built to handle those fluctuations, and it's not a cause for concern. Just keep an eye on the temperature—staying under 90°C during heavy use is ideal.
T
TheRealVaxor69
01-23-2023, 11:03 AM #5

It's actually normal for CPUs to experience slight spikes even at low loads. They're built to handle those fluctuations, and it's not a cause for concern. Just keep an eye on the temperature—staying under 90°C during heavy use is ideal.

M
miknes123
Senior Member
646
01-31-2023, 06:09 AM
#6
It's your first project, that's why I was nervous.
M
miknes123
01-31-2023, 06:09 AM #6

It's your first project, that's why I was nervous.