Here you go!

Pages (2): 1 2 Next

itsasnackle
Junior Member

08-12-2016, 04:27 PM

You're just starting out with building your PC. Your motherboard is a Gigabyte GA-H61-DS2 rev 2.0 running BIOS version F3. The site mentions a newer beta version F10a that offers better GPU support, but it's still early. You're weighing whether to upgrade to the beta BIOS for stability or stick with the current one since it's your first time. That's a smart choice—go with the stable version unless you're confident about the upgrade process.

itsasnackle

08-12-2016, 04:27 PM #1

bishopboys68
Posting Freak

899

08-12-2016, 05:16 PM

It's a Beta BIOS from five years back, but it should work fine.

bishopboys68

08-12-2016, 05:16 PM #2

It's a Beta BIOS from five years back, but it should work fine.

MONSTERmoose91
Senior Member

526

08-12-2016, 07:08 PM

Just checking that thing.

MONSTERmoose91

08-12-2016, 07:08 PM #3

Just checking that thing.

Tlie123
Junior Member

08-16-2016, 06:56 PM

Check if you can add the F10a at once or if you must install it step by step.

Tlie123

08-16-2016, 06:56 PM #4

Check if you can add the F10a at once or if you must install it step by step.

demenciossauro
Member

203

08-17-2016, 09:18 PM

I recommend avoiding the beta bios. Many sites warn you are essentially putting your own money on the line, like this one calling it beta bios for their platform.

demenciossauro

08-17-2016, 09:18 PM #5

I recommend avoiding the beta bios. Many sites warn you are essentially putting your own money on the line, like this one calling it beta bios for their platform.

smag30
Member

140

08-17-2016, 11:06 PM

Sure, the parts should be here in two days. I’ll test it using the already-installed version then try F9 if needed. I’ll make sure to update.

smag30

08-17-2016, 11:06 PM #6

Sure, the parts should be here in two days. I’ll test it using the already-installed version then try F9 if needed. I’ll make sure to update.

dbodizzle
Member

132

08-19-2016, 06:03 PM

Reset CMOS upon receiving the board. Once the BIOS is updated, reset the CMOS once more.

dbodizzle

08-19-2016, 06:03 PM #7

Reset CMOS upon receiving the board. Once the BIOS is updated, reset the CMOS once more.

Conor_Playz
Member

161

08-24-2016, 11:54 AM

How do i clear the CMOS?

Conor_Playz

08-24-2016, 11:54 AM #8

How do i clear the CMOS?

MRheadshotPT
Member

08-25-2016, 10:42 AM

Refer to the instructions for the board. The manual can be found at the provided link.

MRheadshotPT

08-25-2016, 10:42 AM #9

Refer to the instructions for the board. The manual can be found at the provided link.

rento113
Junior Member

08-31-2016, 08:17 PM

#10

When the computer is turned off, I assume...

rento113

08-31-2016, 08:17 PM #10

When the computer is turned off, I assume...

Pages (2): 1 2 Next