F5F Stay Refreshed Hardware Desktop Help with RAM setup ?

Help with RAM setup ?

Help with RAM setup ?

T
TheBBlazze
Junior Member
21
06-04-2022, 02:56 AM
#1
I recently purchased a new PC and decided to upgrade the memory from 16 to 64 gigabytes. The RAM consists of four 16-gigabyte T-Force DDR5 Delta sticks (FF4D532G6400HC32ADC01 16GBx4 DDR5 6400 (1Rx8) CL-32-39-39-84 1.35V). My motherboard is a Gigabyte B650 Gaming wifi6. My system specifications are:

Processor: AMD Ryzen 7 8700F 8-Core Processor at 4.10 GHz
Installed RAM: 64.0 GB (63.6 GB usable)
Device ID: 75D85061-921D-44DF-AEE5-73B807EF61BA
Product ID: 00342-21436-04562-AAOEM
System type: 64-bit operating system, x64-based processor

Pen and touch: No input available for this display

I've heard they can run smoothly at 6000Mhz, but I'm unsure about all the voltage details needed to set up a custom Expo profile. If anyone has advice, I would greatly appreciate it.
T
TheBBlazze
06-04-2022, 02:56 AM #1

I recently purchased a new PC and decided to upgrade the memory from 16 to 64 gigabytes. The RAM consists of four 16-gigabyte T-Force DDR5 Delta sticks (FF4D532G6400HC32ADC01 16GBx4 DDR5 6400 (1Rx8) CL-32-39-39-84 1.35V). My motherboard is a Gigabyte B650 Gaming wifi6. My system specifications are:

Processor: AMD Ryzen 7 8700F 8-Core Processor at 4.10 GHz
Installed RAM: 64.0 GB (63.6 GB usable)
Device ID: 75D85061-921D-44DF-AEE5-73B807EF61BA
Product ID: 00342-21436-04562-AAOEM
System type: 64-bit operating system, x64-based processor

Pen and touch: No input available for this display

I've heard they can run smoothly at 6000Mhz, but I'm unsure about all the voltage details needed to set up a custom Expo profile. If anyone has advice, I would greatly appreciate it.

D
dr4gen_sl4y3r
Member
151
06-07-2022, 11:16 PM
#2
Welcome to the forums, newcomer!
You have a 4 16 gigabyte T-Force DDR5 Delta memory stick (FF4D532G6400HC32ADC01 16GBx4 DDR5 6400 (1Rx8) CL-32-39-39-84 1.35V).
It's a DELTA RGB DDR5 DESKTOP MEMORY WHITE 32GB (2x16GB) at 6000MHz CL38 - TEAMGROUP.
Desktop DDR5 Overclocked Memory with RGB Colors & 120° Ultra-Wide Lighting
Visit www.teamgroupinc.com
Ensure your motherboard's BIOS is up to date, then activate AMD's E.X.P.O in BIOS. Most adjustments should be complete once this is done.
D
dr4gen_sl4y3r
06-07-2022, 11:16 PM #2

Welcome to the forums, newcomer!
You have a 4 16 gigabyte T-Force DDR5 Delta memory stick (FF4D532G6400HC32ADC01 16GBx4 DDR5 6400 (1Rx8) CL-32-39-39-84 1.35V).
It's a DELTA RGB DDR5 DESKTOP MEMORY WHITE 32GB (2x16GB) at 6000MHz CL38 - TEAMGROUP.
Desktop DDR5 Overclocked Memory with RGB Colors & 120° Ultra-Wide Lighting
Visit www.teamgroupinc.com
Ensure your motherboard's BIOS is up to date, then activate AMD's E.X.P.O in BIOS. Most adjustments should be complete once this is done.

G
GVSH
Member
51
06-08-2022, 01:05 AM
#3
Display images from CPU-Z's memory and speed sections. (upload to imgur.com and share the link)
G
GVSH
06-08-2022, 01:05 AM #3

Display images from CPU-Z's memory and speed sections. (upload to imgur.com and share the link)

S
Sir_Flexo
Member
164
06-08-2022, 09:20 AM
#4
This appears to be two sets of 32GB kits from the listed part numbers.
Combining kits is risky—it might not work.
Place kit 1 in slots A1 and B1, kit 2 in A2 and B2.
Perform a hard bios reset.
Launch the computer and let it boot for several minutes.
Allow time for memory retraining, which can take some time with four sticks.
If it boots successfully and runs stably, proceed to adjust speed and latency.
S
Sir_Flexo
06-08-2022, 09:20 AM #4

This appears to be two sets of 32GB kits from the listed part numbers.
Combining kits is risky—it might not work.
Place kit 1 in slots A1 and B1, kit 2 in A2 and B2.
Perform a hard bios reset.
Launch the computer and let it boot for several minutes.
Allow time for memory retraining, which can take some time with four sticks.
If it boots successfully and runs stably, proceed to adjust speed and latency.

K
kalleboii
Senior Member
738
06-10-2022, 05:46 AM
#5
I'm not confident about connecting your CPU-Z screenshots.
K
kalleboii
06-10-2022, 05:46 AM #5

I'm not confident about connecting your CPU-Z screenshots.

S
SrKaner
Member
222
06-14-2022, 12:34 PM
#6
This product offers an adjustable graphics computer with a telescopic design, suitable for various uses.
S
SrKaner
06-14-2022, 12:34 PM #6

This product offers an adjustable graphics computer with a telescopic design, suitable for various uses.

J
Jmn137
Junior Member
45
06-14-2022, 01:52 PM
#7
Oen imgur.com.
Click the <New Post> button in the upper left corner.
Move your image onto the page.
Wait for the upload to complete. A button labeled <Grab link/Copy link> will show up.
Press this button to copy the link to your clipboard.
Paste the link into the post here.
J
Jmn137
06-14-2022, 01:52 PM #7

Oen imgur.com.
Click the <New Post> button in the upper left corner.
Move your image onto the page.
Wait for the upload to complete. A button labeled <Grab link/Copy link> will show up.
Press this button to copy the link to your clipboard.
Paste the link into the post here.