Help with custom water cooler
Help with custom water cooler
Hi Everyone,
I’m reaching out with a quick inquiry—I’m planning a custom water cooling setup and wanted your thoughts. I’m curious if I’m missing any obvious errors in my component selection and how best to manage the fluid flow. I was considering using the stopCock from the pump output as it seems like a low-pressure point in my build.
Here’s the parts list, thanks ahead.
Best regards,
Paul
Everything appears fine. The most effective method is to use a soft tube from the bottom of the reservoir to a concealed location, with a valve at the end so you can keep it sealed and let water drain out when needed.
If you place this in an appropriate position within your system, there are fitting connections on both sides for easy tubing attachment. There are also various color options available.
Everything appears fine. The most effective method is to use a soft tube from the bottom of the reservoir to a concealed location, with a valve at the end so you can keep it sealed and let water drain out when needed.
If you place this in an appropriate position within your system, there are fitting taps on both sides for easy connection of tubing. There are also various color options available.
Everything seems fine. The best method is to use a soft tube from the bottom of the reservoir to a hidden location, with a valve at the end so you can keep it closed and let water drain out when needed.
If you place this in a suitable position, there are fitting taps on both ends for easy tubing connection. There are also various colors available.
That matches exactly what I was thinking... I'm really looking forward to it, though I'm a bit nervous about bending the pipe but I enjoy the challenge.
Thanks for the link—it's exactly what I needed.
Cheers
Paul