[Help] Overclocked RAM

F5F Stay Refreshed Hardware Desktop [Help] Overclocked RAM

XaVaTaR
Member

02-13-2021, 02:47 PM

Hello, your concern is understandable. I'm checking the compatibility of your overclocking with your specific RAM model. The Trident Z RGB F4-3200C16D-16GTZR 2*8 Gb at 1.35V seems fine, but pushing it to 3766MHz could be risky. Running Prime95 under stress for two hours showed stability, which is a good sign. However, overclocking RAM beyond its rated voltage or frequency might damage it. It's best to stick to the manufacturer's recommended limits unless you're certain about your setup. If in doubt, consult a professional or check detailed forum discussions for your exact model.

XaVaTaR

02-13-2021, 02:47 PM #1

Yanna2005
Junior Member

02-13-2021, 07:43 PM

As long as your voltages and temperatures remain within safe limits, everything should work fine. Your voltage matches the standard supply, which means no issues there.

Yanna2005

02-13-2021, 07:43 PM #2

As long as your voltages and temperatures remain within safe limits, everything should work fine. Your voltage matches the standard supply, which means no issues there.

vandalmal
Member

201

02-14-2021, 02:33 AM

^ this works as long as your voltage level is acceptable

vandalmal

02-14-2021, 02:33 AM #3

^ this works as long as your voltage level is acceptable

kiddswagg_760
Member

211

02-14-2021, 07:06 AM

Thank you all for your prompt and concise response!

kiddswagg_760

02-14-2021, 07:06 AM #4

Thank you all for your prompt and concise response!