Help me with the PSU issue—just one click needed. Need the PC for the Teams interview!
Help me with the PSU issue—just one click needed. Need the PC for the Teams interview!
I just assembled the new system but it won’t post at all. Nothing happens except a single click from the PSU, which I believe is the current bypass relay, indicating a short somewhere. The case is older than before and I’ve lost some of the motherboard screws. I’ve tried connecting it to various sockets without success. I disconnected RAM, GPU, AIO, front panel I/O, and even the power supply to see if it would boot, but nothing worked. Before installing the PSU, I ran the old paperclip test and everything was fine. My guess is the missing screws on the stand-offs are causing the issue. Has anyone else experienced this? Am I on the right path?
You can eliminate the problem if the issue isn't related to the case standoffs. Check whether both 8pin EPS connectors are being used on the motherboard or just one. The TX650M comes with only a single EPS12V connector, meaning you should only have one CPU power cable connected. Also, confirm you're using the correct cable from the same power supply as intended.
The TX650M includes just one pre-wired 8-pin CPU but has a modular socket for additional CPU cables. I'm checking existing cables to confirm if a separate CPU cable was provided.
You must use the exact cables provided with the Corsair unit. These are marked "Type 4" (or possibly "Type 3") on the power supply side of the connector. Avoid any other cables. Only connect one EPS12V (CPU power) cable to the motherboard. No extra cables needed. If the wrong cable was used and it wasn't damaged, it should function properly once you remove the faulty one. Updated August 5, 2024 by Spotty
Check the board on the old case. Take out the rig and place it on a soft, non-conductive surface like a mouse pad, wood, or cloth. It might not be perfect, but it could work.