Help
Help
A1 doesn't show any graphics output, possibly due to GPU or onboard graphics not being detected. The issue might be related to RAM. I recommend removing and reinserting the graphics card to resolve this. Also, verify all power connections for the graphics card. Clear the CMOS by removing and reseating the RAM, especially if you have only two modules. Test by using just one RAM module at a time. For better support in the future, please include clearer thread titles so experts can quickly identify the problem. Writing complete sentences with proper punctuation will help ensure easier understanding and assistance.
Attempted testing with one stick of RAM and every slot. Discovered another user on a comparable system had a faulty motherboard. Suggested further troubleshooting before concluding. Also noted someone mentioned disconnecting the monitor for 30 seconds before reconnecting it.
Also thanks for your assistance! If the issue relates to a GPU, what steps should I take with my new 6900xt?
I haven't completed any troubleshooting steps for the GPU yet. Would you like me to go through them together?
Share the clip once you toss it onto the sidewalk. After following @Middcore's instructions.
Check if components are properly connected, take out GPU and RAM, restart, and reconnect everything
I changed the graphics card, verified all power connectors, removed the CMOS battery, took out the 6900xt chip and swapped it for a Nvidia 2070 Super. The same signal came out—just one long beep followed by two short ones. I left three RAM sticks in, with one in the #2 slot. I’m still stuck.