F5F Stay Refreshed Software Operating Systems HELP!

HELP!

HELP!

G
GopherTM
Junior Member
2
11-28-2016, 05:11 AM
#1
You were using Windows normally until you encountered a BSOD. After some days, your PC wouldn't boot and it reported missing a bootloader. You had a Linux bootloader ready for dual booting, so you installed it. Now you're using Ubuntu. To switch back to Windows without hassle, you'll need to reinstall Windows or restore your previous setup. Since you didn't install Ubuntu yet, you can try reinstalling Windows from the installation media or using a recovery tool.
G
GopherTM
11-28-2016, 05:11 AM #1

You were using Windows normally until you encountered a BSOD. After some days, your PC wouldn't boot and it reported missing a bootloader. You had a Linux bootloader ready for dual booting, so you installed it. Now you're using Ubuntu. To switch back to Windows without hassle, you'll need to reinstall Windows or restore your previous setup. Since you didn't install Ubuntu yet, you can try reinstalling Windows from the installation media or using a recovery tool.

T
Turquose
Member
198
12-02-2016, 02:51 AM
#2
Use the Windows troubleshooting disk and attempt a startup repair.
T
Turquose
12-02-2016, 02:51 AM #2

Use the Windows troubleshooting disk and attempt a startup repair.

T
tacorich1k23
Member
110
12-06-2016, 10:07 PM
#3
You asked about fixing Windows issues related to the disk troubleshooter. It seems you experienced problems where the system tried to repair itself but gave unclear feedback about hardware or boot problems.
T
tacorich1k23
12-06-2016, 10:07 PM #3

You asked about fixing Windows issues related to the disk troubleshooter. It seems you experienced problems where the system tried to repair itself but gave unclear feedback about hardware or boot problems.

K
khaledkb_
Senior Member
724
12-14-2016, 08:14 AM
#4
Uncertain about the Windows version or whether you need to start from a USB drive. Could be necessary if booting isn't possible.
K
khaledkb_
12-14-2016, 08:14 AM #4

Uncertain about the Windows version or whether you need to start from a USB drive. Could be necessary if booting isn't possible.

S
ShaneTV
Member
162
12-18-2016, 02:37 PM
#5
what was the BSOD error code?
S
ShaneTV
12-18-2016, 02:37 PM #5

what was the BSOD error code?

J
Jinxy_Inx
Junior Member
11
12-18-2016, 08:56 PM
#6
Creating a USB boot drive could help you access Windows or reinstall it. Since you're on Windows 7, look for Linux-compatible bootloader guides to set up a bootable USB. Even if you're unsure about your USB connection, checking both devices might clarify which one is active.
J
Jinxy_Inx
12-18-2016, 08:56 PM #6

Creating a USB boot drive could help you access Windows or reinstall it. Since you're on Windows 7, look for Linux-compatible bootloader guides to set up a bootable USB. Even if you're unsure about your USB connection, checking both devices might clarify which one is active.

F
FreelyPvP
Junior Member
20
12-19-2016, 07:39 PM
#7
You can verify your file access by checking the permissions and ownership of your Windows files.
F
FreelyPvP
12-19-2016, 07:39 PM #7

You can verify your file access by checking the permissions and ownership of your Windows files.

O
ofeliant
Member
174
12-21-2016, 06:56 PM
#8
The bootloader appears to be showing a smaller USB drive than it actually is. The system lists a 4GB USB, but the computer shows a 2.1GB limit, and the OS is displayed as a 1TB SSD.
O
ofeliant
12-21-2016, 06:56 PM #8

The bootloader appears to be showing a smaller USB drive than it actually is. The system lists a 4GB USB, but the computer shows a 2.1GB limit, and the OS is displayed as a 1TB SSD.

M
marre37
Member
53
12-23-2016, 04:49 PM
#9
You can partition your Linux HD from within Linux itself. You don’t need Windows for this process. Once you finish partitioning, you can transfer your Linux system to the new partition using tools like GParted or GParted GUI. For moving files, you’ll need to back them up first and then use a partition manager or command-line utilities to copy the necessary data. The USB you’re using should be sufficient for now, but keep in mind its capacity may limit performance as you add more files.
M
marre37
12-23-2016, 04:49 PM #9

You can partition your Linux HD from within Linux itself. You don’t need Windows for this process. Once you finish partitioning, you can transfer your Linux system to the new partition using tools like GParted or GParted GUI. For moving files, you’ll need to back them up first and then use a partition manager or command-line utilities to copy the necessary data. The USB you’re using should be sufficient for now, but keep in mind its capacity may limit performance as you add more files.