header for cpu fan control
header for cpu fan control
You should be cautious about using an AIO with a generic motherboard from a prebuilt system. It’s not guaranteed to work safely without proper compatibility checks. Always verify the specifications match your setup.
Typically, you can connect a pump directly to a fan header. You’ll need access to the BIOS to adjust the header to operate at full capacity. Ensure the header voltage matches—most are 12V, though some pre-built boards use only 5V. If unsure, consider using a SATA to 3-pin adapter or a Molex to 3-pin adapter. This approach is usually the simplest and most reliable way to provide 12V power to the pump.
it's an acer aspire gx 785 ur17 with a BIOS that doesn't have fan control—it's a pretty bad motherboard.