Have you considered upgrading your RAM?
Have you considered upgrading your RAM?
I upgraded my GPU and now I realize 16GB won’t suffice. RAM usage is at 98% during Monster Hunter Wilds, with some unusual stutters that weren’t there before. (Maybe related to RAM?) Looking for a solid 2x16GB kit—prefer not to mix different kits unless I discover another 2x8GB "B-die" option… unlikely. Your current setup includes a Ryzen 5800X3D CPU, MSI B550M motherboard, GSKILL TRIDENT-Z 3200, Gigabyte 5070 AERO OC, case, storage, and SSDs.
I prefer G.skill mainly because DDR4 doesn't cause much issues unless you opt for custom builds. The specific model is known as Ripjaws V. It offers solid heatsinks and decent performance. Corsair Vengeance LPX is another good option, though they tend to be a bit slower at higher frequencies. Most competitors like Teamgroup Vulcans and Patriots Viper Elite are also reasonably priced. The cheapest reliable choice seems to be G.skill Aegis, but it usually lags behind in speeds around 2400, 2666, or 3200 MHz. Otherwise, we have Teamgroup Vulcans and Patriots Viper Elite. Personally, I’d go with Ripjaws V since most kits now match in price, so the added confidence from G.skill wouldn’t be a drawback.
this sense of calm you mention isn't real, everyone relies on the same Hynix and Samsung parts, so most of your purchase is just a generic heatspreader for these standard XMPS. For this project we need to locate some used 3200C14/15, 3600C14 or 16-16-16 models to match the exact IC and ensure compatibility. This won't affect performance if you're not pushing extreme overclocks—just make sure the board you choose is solid enough for your needs. You might also consider older GSKILL flare kits or similar options, but the heatspreader type remains important.
I think it should work fine with a random Trident Z 3200 or 3600. My RAM stays cool, usually around 40-50°C max. It won’t fail completely, though I’m more worried about stability than pushing it too high. I’ve had bad experiences with Corsair products before—different kits, frequent crashes, WHEA errors, etc.—but my current setup is solid. It’s confusing because there are many different versions of Trident Z RGB with varying prices, but they all seem to last.
For 5800X3D it doesn't matter. I run 3200 jedec sticks and its nice. 1.2v and easy on the imc. Cooler and no difference what so ever. Of course if you care about a very small increase in fps get lower timing kit But in all seriousness, anything over 3200@cl16 is not going to yield much on 5800X3D.
Gskill seems to aim for 1.35v on Trident Z, but MSI boards usually set it to 1.36v with XMP enabled. Even my modest overclock requires 1.36, and 1.35 doesn't start Windows. It's just a tiny latency improvement, probably not noticeable. Note: I missed seeing your mention of JDEC—could be another option too.
You're suggesting I consider purchasing the "dust magnet" RAM for just $60...? It offers a significant discount of 10 dollars, mainly due to free shipping. The product page also highlights its performance benefits.