Have worked with powerline adapters before.
Have worked with powerline adapters before.
The D-Link AV2 kit works best with reliable wiring in your home. Good quality connections usually provide solid speeds, while poor wiring can cause issues. I use it occasionally at home when a wired connection isn't feasible and it performs adequately.
I received a D-link AV2 1000, which doesn't deliver full speeds. It operates much slower than WiFi, though it's still an improvement. Despite having brand new wiring, there might be external factors affecting performance. I'm not satisfied, but finding a practical solution to reach the room without drilling holes is proving difficult.
I work with powerline systems for about a decade. The newest model I use is AV2000, while my AV1200 functions similarly. Through the internet I can achieve speeds around 150-180mbps down and upload 40-45mbps. I can’t confirm the exact upload limit since my connection caps at 40-45mbps. It’s important to verify your wiring is correct. You can purchase polarity plugs from Harbor Freight for about $5 to test your setup. Avoid mixing brands or box generations—stick to a single two-pack connection. Adding more adapters can cause speed drops and conflicts. Another choice is MOCA version 2, which reportedly supports up to 1gbps by using unused cable lines instead of traditional powerline. Ideally, you’d be able to transfer data at 300-400mbps, but that’s rare. Most users opt for powerline because their Wi-Fi is poor; it can be better or worse depending on your setup. If you run a speed test and share the results, I can help assess if improvements are possible. Make sure you have a gigabit router or switch for your powerline connection, otherwise expect speeds under 100mbps.