F5F Stay Refreshed Hardware Desktop Have trouble with the CPU debug light on your motherboard? Let me know how I can assist you.

Have trouble with the CPU debug light on your motherboard? Let me know how I can assist you.

Have trouble with the CPU debug light on your motherboard? Let me know how I can assist you.

3
331ms
Member
Find
94
05-21-2018, 07:13 AM
#1
I own a B360 motherboard with an i5 8400 and 8GB RAM, along with a GTX 1060. After turning on secure boot, the board stopped responding. I cleared the CMOS but the CPU light still flickers and turns off. When I power it back on, it restarts repeatedly. I’m seeking advice here. Thank you.
Reply
Reply
3
331ms
05-21-2018, 07:13 AM #1

I own a B360 motherboard with an i5 8400 and 8GB RAM, along with a GTX 1060. After turning on secure boot, the board stopped responding. I cleared the CMOS but the CPU light still flickers and turns off. When I power it back on, it restarts repeatedly. I’m seeking advice here. Thank you.

Reply
Reply
D
DrummerBS
Member
Find
185
05-21-2018, 01:00 PM
#2
It seems like the CPU might be malfunctioning. Let's explore alternatives. If we remove the GPU and attempt to boot from the built-in graphics, see if it functions. If that doesn't resolve the issue, carefully dismantle the components, place the motherboard inside a cardboard box, and test it outside the case to rule out shorts. If successful, reassemble everything carefully, checking for loose wires or screws. If problems persist, consider replacing the CPU or consulting a local repair shop for testing.
Reply
Reply
D
DrummerBS
05-21-2018, 01:00 PM #2

It seems like the CPU might be malfunctioning. Let's explore alternatives. If we remove the GPU and attempt to boot from the built-in graphics, see if it functions. If that doesn't resolve the issue, carefully dismantle the components, place the motherboard inside a cardboard box, and test it outside the case to rule out shorts. If successful, reassemble everything carefully, checking for loose wires or screws. If problems persist, consider replacing the CPU or consulting a local repair shop for testing.

Reply
Reply
N
NinatoPvP
Posting Freak
Find
899
05-22-2018, 08:40 PM
#3
Attempt to extend bios flush duration beyond the standard ten seconds, repeating it several times. Consider relocating the boot process to alternate RAM slots.
Reply
Reply
N
NinatoPvP
05-22-2018, 08:40 PM #3

Attempt to extend bios flush duration beyond the standard ten seconds, repeating it several times. Consider relocating the boot process to alternate RAM slots.

Reply
Reply
S
Sonorpearl
Junior Member
Find
10
05-23-2018, 04:32 AM
#4
To turn on or off secure boot, you must reformat your Windows installation media. Even after changing the setting, this often isn’t enough. You might need to delete all drives—including the boot drive—and restart from BIOS. If you don’t see the change, it could mean a hardware issue occurred at the same time. A CPU debug light indicates the processor or related chips aren’t responding during startup. If replacing the CPU doesn’t fix the problem, try testing it on another machine to check its condition.
Reply
Reply
S
Sonorpearl
05-23-2018, 04:32 AM #4

To turn on or off secure boot, you must reformat your Windows installation media. Even after changing the setting, this often isn’t enough. You might need to delete all drives—including the boot drive—and restart from BIOS. If you don’t see the change, it could mean a hardware issue occurred at the same time. A CPU debug light indicates the processor or related chips aren’t responding during startup. If replacing the CPU doesn’t fix the problem, try testing it on another machine to check its condition.

Reply
Reply
J
Jayseq
Junior Member
Find
14
05-23-2018, 01:40 PM
#5
Your hard drive might use an MBR layout and won’t run properly when Secure Boot is enabled. You may need to switch to GPT format using the mbr2gpt.exe tool from the command prompt. This ensures UEFI compatibility. MBR is the older file system style. To start, turn off Secure Boot and then convert it to GPT. After that, you’ll have to enter BIOS settings to set it to UEFI before it will boot. Good luck!
Reply
Reply
J
Jayseq
05-23-2018, 01:40 PM #5

Your hard drive might use an MBR layout and won’t run properly when Secure Boot is enabled. You may need to switch to GPT format using the mbr2gpt.exe tool from the command prompt. This ensures UEFI compatibility. MBR is the older file system style. To start, turn off Secure Boot and then convert it to GPT. After that, you’ll have to enter BIOS settings to set it to UEFI before it will boot. Good luck!

Reply
Reply
M
Martienez123
Member
Find
52
05-25-2018, 04:46 AM
#6
I attempted to start using the onboard graphics, but it still doesn't function properly. The motherboard doesn’t illuminate as expected when I flip the PSU switch. I’ve tested other boards and they work fine, so this one seems different. I checked online about Secure Boot on Gigabyte MBOO bricks—it’s possible that’s the reason. When I first booted after Secure Boot, the VGA light came on and then I got stuck with the CPU light issue. What do you think?
Reply
Reply
M
Martienez123
05-25-2018, 04:46 AM #6

I attempted to start using the onboard graphics, but it still doesn't function properly. The motherboard doesn’t illuminate as expected when I flip the PSU switch. I’ve tested other boards and they work fine, so this one seems different. I checked online about Secure Boot on Gigabyte MBOO bricks—it’s possible that’s the reason. When I first booted after Secure Boot, the VGA light came on and then I got stuck with the CPU light issue. What do you think?

Reply
Reply