F5F Stay Refreshed Hardware Desktop Has there been a problem with your power supply?

Has there been a problem with your power supply?

Has there been a problem with your power supply?

I
iiSweeTzz
Posting Freak
862
02-01-2023, 11:38 PM
#1
Hey guys, this is a prebuilt bought new in January 2023. The specific prebuilt is a Powerspec g905 from Microcenter. Any idea what could be causing this noise? A full cleaning and reseating of cables has been done so far. The pc will boot up and run just fine, after about five minutes the noise will start. IMG_5731.MOV
I
iiSweeTzz
02-01-2023, 11:38 PM #1

Hey guys, this is a prebuilt bought new in January 2023. The specific prebuilt is a Powerspec g905 from Microcenter. Any idea what could be causing this noise? A full cleaning and reseating of cables has been done so far. The pc will boot up and run just fine, after about five minutes the noise will start. IMG_5731.MOV

F
Feed4Jeus
Member
132
02-02-2023, 01:38 AM
#2
It seems like you're wondering about possible causes of noise near a PSU and whether sound is more noticeable there. You might need to check the specific components involved. Also, consider what type of fan you're dealing with—sound can vary depending on its design.
F
Feed4Jeus
02-02-2023, 01:38 AM #2

It seems like you're wondering about possible causes of noise near a PSU and whether sound is more noticeable there. You might need to check the specific components involved. Also, consider what type of fan you're dealing with—sound can vary depending on its design.

T
tonny0950
Member
67
02-06-2023, 07:10 AM
#3
A cable striking fan blades or a water pump containing air are potential issues.
T
tonny0950
02-06-2023, 07:10 AM #3

A cable striking fan blades or a water pump containing air are potential issues.

Z
zlip88
Member
198
02-06-2023, 09:49 AM
#4
that air should have cleared out after 10 min.. the fan would eventualy stop by itself.. when the cable that's hitting it is worn out .. but still shoddy build to deliver that. unless it's just a bearing that's making the noice. @O Grizz press lightly on the hub of each fan to stop them to determine what fan is faulty.
Z
zlip88
02-06-2023, 09:49 AM #4

that air should have cleared out after 10 min.. the fan would eventualy stop by itself.. when the cable that's hitting it is worn out .. but still shoddy build to deliver that. unless it's just a bearing that's making the noice. @O Grizz press lightly on the hub of each fan to stop them to determine what fan is faulty.