Hardware failure ?
Hardware failure ?
This setup was built using the initial RAM module, which failed after six months. After replacing it, the system remained functional for another six months. However, when I paused a game for an hour or more, the computer would freeze and restart automatically. Subsequent attempts to fix this involved formatting, reinstalling Windows 11, and even reformatting again, but the repair loop persisted. I also tried reseating RAM, clearing CMOS, and removing/reinstalling the graphics card, yet the issue continued.
I attempted a BIOS reset to F3, re-seated the RAM and GPU, and ran the DDU tool with updated drivers. After a clean installation of Windows and multiple restarts, the repair loop still occurred. I considered replacing the motherboard, as the PSU tester is arriving tonight, and questioned whether the issue might stem from an older GPU or insufficient warranty coverage.
I am contemplating whether a hardware swap might be necessary, especially since the PNY card requires registration within 30 days and the warranty is three years. I do not want to risk purchasing another unit or skipping the registration process.
It's a waste of money. It only tests the PSU without any load at all. Also, the PSU doesn't lead to Win repair problems unless it sends out-of-spec voltages to the storage drive, which can damage it and corrupt files there. You can still run drive checks to see if the SSD is functioning properly. Given the situation, I also recommend considering a new motherboard.
Thank you for the input. I’m hoping it’s just the board since it would be more affordable than a GPU. Now, choosing which LGA1700 board to select. I used to be a loyal ASUS user but heard bad reviews, so I’m uncertain about getting another Gigabyte LGA1700 board with this issue.
Without Asus and Gigabyte, the selection is quite narrow.
Personally, I'm sticking with MSI MoBos and there have been no problems so far.
Other choices include AsRock, EVGA (reliable but limited options), NZXT (more variety than EVGA but still restricted) and Biostar (I don't think you'd be interested in that).
I used MSI, launched Windows, and everything appeared fine until I restarted and saw a black screen unless the onboard graphics were active. I’m wondering if this card is faulty or if the PSU isn’t delivering enough power to the GPU. I plan to perform a clean install and try again, even though I changed motherboards with the same Windows setup—uncertain if it’ll make a difference. The RGB lights turn on with the 4070, but they also activate when the PSU is disconnected from the card. It appears in the hardware manager with a Code 43 error.
PCI-E x16 port can deliver up to 75W of power, allowing GPU lights to stay on even after the PCI-E power cable is removed.
Recent updates include a fresh clean Windows installation.
Possible causes might be:
1. Corrupted GPU drivers.
2. Damaged GPU BIOS.
3. A faulty GPU itself.
You’ve likely ruled out driver issues (DDU + older versions). Next, consider the BIOS.
Download and flash the new BIOS from the provided link: https://www.techpowerup.com/vgabios/2567...8-230313-1
Attempt to update the BIOS on the GPU, even if it matches the version on TechPowerUP, as corruption is possible.
If this fails and no improvement appears, the GPU may be beyond repair.
Looking ahead, you might need to purchase a new GPU or take the existing one to a repair shop.
For example, check out Northridge Fix: https://northridgefix.com/
Alex, the founder and owner, maintains a YouTube channel where he demonstrates repairs; it’s worth watching occasionally.
Specifically for RTX 3090 repairs: https://www.youtube.com/watch?v=kxnUAt0_YVE
Almost forgotten: the Tt Toughpower GF1 is a low quality unit, almost worthless. It’s possible the PSU was the reason your build failed and damaged your GPU as well. I’d recommend upgrading to a new, higher quality unit. Good PSUs to consider are: Seasonic Focus/Vertex/PRIME, Corsair RMx/RMi/HXi/AXi, Super Flower Leadex Gold/Platinum/Titanium, in the 650W range. For another perspective on your PSU, check the tier list here: https://forums. It should be listed under Tier C, low priority units. What I’m using and suggest most often are all Tier A.
Thank you for sharing the detailed update! After a fresh install and a clean setup, everything is working well for about 12 hours with multiple restarts. It seems the new motherboard and updated chipset drivers resolved the problem. I didn’t notice my power supply was of poor quality, so I should have done more research earlier. I plan to purchase a new power supply just in case to avoid any future issues with the motherboard or GPU. Thank you for your assistance and valuable guidance!
Ooof, I spoke too soon. I just used Massgrave Dev to turn on Windows, restarted, and the external GPU went blank. I managed to enter BIOS but had to switch to the onboard GPU to view the screen.