F5F Stay Refreshed Hardware Desktop Guide pour le Xeon X5650 OC

Guide pour le Xeon X5650 OC

Guide pour le Xeon X5650 OC

Y
yazug
Junior Member
10
03-12-2017, 06:16 PM
#1
Hello everyone, I'm looking for help with overclocking my X5650 CPU. I've checked forums and YouTube, but no useful info seems available. I'm having trouble booting—sometimes I need to remove the CMOS battery and reinsert it, or else I just keep restarting. My system specs are: motherboard ASUS P6T6 WS, Intel Xeon X5650 CPU, 10GB DDR3 RAM at 1333Mhz, a Gigabyte G1 Gaming GTX 1070 Ti GPU, and a 600W PSU with a Chieftec heatsink that holds two 120mm coolers. I won't accept generic suggestions like "better triple channel RAM." Can anyone assist me with this?
Y
yazug
03-12-2017, 06:16 PM #1

Hello everyone, I'm looking for help with overclocking my X5650 CPU. I've checked forums and YouTube, but no useful info seems available. I'm having trouble booting—sometimes I need to remove the CMOS battery and reinsert it, or else I just keep restarting. My system specs are: motherboard ASUS P6T6 WS, Intel Xeon X5650 CPU, 10GB DDR3 RAM at 1333Mhz, a Gigabyte G1 Gaming GTX 1070 Ti GPU, and a 600W PSU with a Chieftec heatsink that holds two 120mm coolers. I won't accept generic suggestions like "better triple channel RAM." Can anyone assist me with this?

S
Seagull1337
Junior Member
16
03-12-2017, 11:15 PM
#2
Do you verify dropping the memory multiplier during OC? BCLK OC will display the memory speed.
S
Seagull1337
03-12-2017, 11:15 PM #2

Do you verify dropping the memory multiplier during OC? BCLK OC will display the memory speed.

S
147
03-14-2017, 06:17 AM
#3
Sure, I attempted one choice but wasn't completely confident. I'm aiming for a target of 3.6 to 3.8.
S
Shadowxplayz23
03-14-2017, 06:17 AM #3

Sure, I attempted one choice but wasn't completely confident. I'm aiming for a target of 3.6 to 3.8.

S
Super_dan65
Junior Member
6
03-14-2017, 11:24 AM
#4
Requires a 164 MHz clock to reach 3.6 GHz. Use a 22x scaling factor. Turn off c-states and enable turbo boost. Adjust memory settings to the 1066 MHz multiplier, which should yield around 1300 MHz. Most Westmere-EP Xeons should handle this without needing voltage adjustments.
S
Super_dan65
03-14-2017, 11:24 AM #4

Requires a 164 MHz clock to reach 3.6 GHz. Use a 22x scaling factor. Turn off c-states and enable turbo boost. Adjust memory settings to the 1066 MHz multiplier, which should yield around 1300 MHz. Most Westmere-EP Xeons should handle this without needing voltage adjustments.

S
schtaben
Junior Member
17
03-14-2017, 06:14 PM
#5
I'll handle it later when I'm free, and I'll keep updating this thread!
S
schtaben
03-14-2017, 06:14 PM #5

I'll handle it later when I'm free, and I'll keep updating this thread!

G
Gui_HD
Member
64
03-17-2017, 05:32 PM
#6
I finally acquired my PC and attempted those settings... It kept crashing with BSODs. The only consistent performance was at 3.4GHz without any voltage changes.
G
Gui_HD
03-17-2017, 05:32 PM #6

I finally acquired my PC and attempted those settings... It kept crashing with BSODs. The only consistent performance was at 3.4GHz without any voltage changes.