Guide for boosting 5600X Hynix DJR performance
Guide for boosting 5600X Hynix DJR performance
Hello, Your Ryzen 5 5600X with HyperX Fury and Hynix DJR RAM at 3200 MHz is working but you're considering upgrading to 3600 MHz. You used the Ryzen DRAM calculator version 1.7.3, entered your specs from Thaiphoon, and tried BIOS settings including tRCPAGE, though some were missing. After booting into Windows and running membench in the calculator, you encountered errors. It seems the issue might be with the BIOS configuration or the auto OC settings, not necessarily a hardware limitation. Your motherboard supports higher speeds, but ensure all components are compatible. Let me know if you need further help.
Hynix DJR performs poorly with Ryzen processors, offering limited value.
Reach out to others with similar configurations. Adjust latency settings to values like 18,19,19,21, or 38 while keeping everything else automatic. Ensure the RAM voltage is set between 1.37 and 1.4.
Assuming DJR behaves like CJR, it should work up to about 1.45V. It might be a good idea to verify this, as I haven't tested DJR directly but it appears similar in DRAM calculations.
Thank you, I successfully achieved 3600 with these settings and there were no issues.
Run tests with memtest86, increase voltage if needed to 1.45.