F5F Stay Refreshed Hardware Desktop GPU issues during gameplay reported. Assistance needed.

GPU issues during gameplay reported. Assistance needed.

GPU issues during gameplay reported. Assistance needed.

Pages (3): Previous 1 2 3 Next
Z
zLeoZiin
Senior Member
503
03-07-2023, 11:02 PM
#11
There appears to be an issue. HAGS works perfectly with the 7000 series. Make sure your monitor is connected to your graphics card, not the built-in one. Check if above 4G deciding and Resizable BAR (AMD Smart Access Memory SAM) are enabled in the BIOS. Have you reinstalled the GPU driver?
Z
zLeoZiin
03-07-2023, 11:02 PM #11

There appears to be an issue. HAGS works perfectly with the 7000 series. Make sure your monitor is connected to your graphics card, not the built-in one. Check if above 4G deciding and Resizable BAR (AMD Smart Access Memory SAM) are enabled in the BIOS. Have you reinstalled the GPU driver?

W
WarZ0NE
Junior Member
9
03-14-2023, 02:15 PM
#12
Main display connects straight to GPU via DisplayPort, while the secondary screen is linked through MB graphics using HDMI. I’m not familiar with Above 4G—does it appear in BIOS settings? SAM is active in BIOS and Adrenaline. I’ve reconfigured the graphics drivers twice. Are there any other programs besides Adrenaline required to run with my AMD card? Most users only mention Adrenaline for this setup. I’m uncertain why HAGS isn’t available; I thought it was turned on around 2023 for AMD cards.
W
WarZ0NE
03-14-2023, 02:15 PM #12

Main display connects straight to GPU via DisplayPort, while the secondary screen is linked through MB graphics using HDMI. I’m not familiar with Above 4G—does it appear in BIOS settings? SAM is active in BIOS and Adrenaline. I’ve reconfigured the graphics drivers twice. Are there any other programs besides Adrenaline required to run with my AMD card? Most users only mention Adrenaline for this setup. I’m uncertain why HAGS isn’t available; I thought it was turned on around 2023 for AMD cards.

T
T1NA_Bear
Member
221
03-14-2023, 06:01 PM
#13
Above 4G decoding and resizing BAR were activated in the BIOS.
T
T1NA_Bear
03-14-2023, 06:01 PM #13

Above 4G decoding and resizing BAR were activated in the BIOS.

M
177
03-22-2023, 08:35 AM
#14
Use only the GPU for processing. The graphics unit inside the CPU doesn<|pad|>, can't handle HAGS.
M
Mystic_PvP1213
03-22-2023, 08:35 AM #14

Use only the GPU for processing. The graphics unit inside the CPU doesn<|pad|>, can't handle HAGS.

T
taco2006
Member
203
03-23-2023, 04:34 PM
#15
Both displays are connected to the GPU, but HAGS isn't visible in the graphics settings. It also doesn't appear when I try to enable it in WinToys. The linked image is provided.
T
taco2006
03-23-2023, 04:34 PM #15

Both displays are connected to the GPU, but HAGS isn't visible in the graphics settings. It also doesn't appear when I try to enable it in WinToys. The linked image is provided.

B
ByJackTV
Junior Member
17
03-25-2023, 02:47 PM
#16
Yes, it appears to be Windows 10.
B
ByJackTV
03-25-2023, 02:47 PM #16

Yes, it appears to be Windows 10.

M
Misterjaws77
Member
215
03-25-2023, 03:46 PM
#17
M
Misterjaws77
03-25-2023, 03:46 PM #17

G
Goteman42
Junior Member
12
03-25-2023, 05:15 PM
#18
Why?
G
Goteman42
03-25-2023, 05:15 PM #18

Why?

C
CapitanMario
Junior Member
14
03-27-2023, 04:04 AM
#19
I'm used to the number 10.
C
CapitanMario
03-27-2023, 04:04 AM #19

I'm used to the number 10.

V
vicvic531531
Member
102
03-29-2023, 08:56 AM
#20
Your system isn't quite up to date. The latest build is 22H2, which corresponds to September 2022, and your components are newer. I suggest upgrading for free to version 11, testing its performance and addressing any problems if they arise. If you still can't get by, you can revert to an older version. I'm confident the issue should resolve itself.
V
vicvic531531
03-29-2023, 08:56 AM #20

Your system isn't quite up to date. The latest build is 22H2, which corresponds to September 2022, and your components are newer. I suggest upgrading for free to version 11, testing its performance and addressing any problems if they arise. If you still can't get by, you can revert to an older version. I'm confident the issue should resolve itself.

Pages (3): Previous 1 2 3 Next