GPU is firmly attached to the motherboard and the pin remains closed

F5F Stay Refreshed Hardware Desktop GPU is firmly attached to the motherboard and the pin remains closed—need guidance.

GPU is firmly attached to the motherboard and the pin remains closed—need guidance.

Agman10
Senior Member

690

07-29-2024, 02:36 AM

The pressure level remains unchanged regardless of how forcefully you apply it.

Agman10

07-29-2024, 02:36 AM #1

The pressure level remains unchanged regardless of how forcefully you apply it.

Valkxz
Member

212

07-31-2024, 12:17 AM

Push the GPU back into its slot until it fully secures, then the lock should open.

Valkxz

07-31-2024, 12:17 AM #2

Push the GPU back into its slot until it fully secures, then the lock should open.

MU1499
Member

109

08-01-2024, 07:57 PM

I'm unable to proceed. The item doesn't fit.

MU1499

08-01-2024, 07:57 PM #3

I'm unable to proceed. The item doesn't fit.

GENTILPHOQUE
Member

08-03-2024, 08:54 AM

Consider applying pressure to the lower section of the PCIe shield (the metal plate with the ports)

GENTILPHOQUE

08-03-2024, 08:54 AM #4

Consider applying pressure to the lower section of the PCIe shield (the metal plate with the ports)

Mrradical23
Junior Member

08-03-2024, 11:35 AM

I don’t know what to do.

Mrradical23

08-03-2024, 11:35 AM #5

I don’t know what to do.

zLeoZiin
Senior Member

503

08-03-2024, 07:11 PM

Currently, your choices are quite restricted. Return the card to the PCIE slot.

zLeoZiin

08-03-2024, 07:11 PM #6

Currently, your choices are quite restricted. Return the card to the PCIE slot.

Lollypop666
Junior Member

08-03-2024, 09:09 PM

Verify if the power connectors at the opposite end are completely removed. If they are, that's probably where the device is lodged.

Lollypop666

08-03-2024, 09:09 PM #7

Verify if the power connectors at the opposite end are completely removed. If they are, that's probably where the device is lodged.

PuchOCiy
Junior Member

08-03-2024, 11:37 PM

It’s fine, I just damaged that part. I was thinking about swapping it out for another board, but I was planning to get rid of this one. Bummer.

PuchOCiy

08-03-2024, 11:37 PM #8

It’s fine, I just damaged that part. I was thinking about swapping it out for another board, but I was planning to get rid of this one. Bummer.