Gigabyte Aorus B450m with App Center running without overclocking at 5600x
Gigabyte Aorus B450m with App Center running without overclocking at 5600x
I use a Gigabyte Aorus B450m Rev1 M-ATX board. After swapping to the 5600x CPU, the older chip still performs better—could there be an issue with my setup or a compatibility problem? I'm running Gigabyte's F63C BIOS and tried their fixes but haven't managed to adjust voltages manually. Perhaps it's best to keep the stock configuration and hold off until a newer platform is available, or someone can help identify what might be going wrong. Appreciate any advice you can offer.
Ram discusses their experience with Corsair RGB Vengeance Pro SL, highlighting its dual-channel 2666mhz performance up to 3200mhz with XMP support. They mention stable gaming and overclocking to 3.90ghz while maintaining low idle temps around 3100°C. The system runs smoothly at stock settings, though they note a noticeable boost in performance across most games. They also point out the presence of F63A drivers and recent chipset updates, despite the lack of OC capability. Ram finds the automatic tuning feature disabled, possibly due to the Aorus B450M's limitations, which is odd given their hardware.
Resolved the problem. Before the chip swap, I flashed my BIOS from f50 to f60, turned off boosting and re-enabled it. After disabling PBO Auto, the FF15 benchmark ran at 71°C with around 45% usage, so I reinstated PBO but kept boosting disabled. It worked at 4.65 GHz, though it was quite hot.