F5F Stay Refreshed Hardware Desktop Game crashes on your PC

Game crashes on your PC

Game crashes on your PC

Pages (2): Previous 1 2
I
iKegreenS_
Posting Freak
878
11-21-2022, 06:50 PM
#11
After inserting one stick into DIMM B2, ensure proper alignment and secure it firmly. Then proceed with the installation process as per your system requirements.
I
iKegreenS_
11-21-2022, 06:50 PM #11

After inserting one stick into DIMM B2, ensure proper alignment and secure it firmly. Then proceed with the installation process as per your system requirements.

D
DoctorMadcow
Member
201
11-27-2022, 12:20 AM
#12
Start the device and check for identical crashes.
D
DoctorMadcow
11-27-2022, 12:20 AM #12

Start the device and check for identical crashes.

C
Cokkie77
Senior Member
556
11-27-2022, 01:39 AM
#13
It looks like your RAM might be the issue. You're using a single stick and have been playing Fortnite for about five minutes, but it's crashing there. You plan to continue playing to check if the problem persists.
C
Cokkie77
11-27-2022, 01:39 AM #13

It looks like your RAM might be the issue. You're using a single stick and have been playing Fortnite for about five minutes, but it's crashing there. You plan to continue playing to check if the problem persists.

V
Vichoflo
Senior Member
396
11-29-2022, 12:03 AM
#14
Ignore it, I mentioned too soon I got a BSOD
V
Vichoflo
11-29-2022, 12:03 AM #14

Ignore it, I mentioned too soon I got a BSOD

0
05matthew05
Member
62
11-29-2022, 07:03 AM
#15
Check each stick separately one by one. Make sure XMP/DOCP isn't active on your motherboard. Did you purchase two 2x8GB kits? Align the serial numbers so the sticks remain in their original sets. Proceed with two sticks in slots B2 and A2 to test stability. If that works, continue testing all four RAM modules. If it fails, we likely need minor voltage tweaks.
0
05matthew05
11-29-2022, 07:03 AM #15

Check each stick separately one by one. Make sure XMP/DOCP isn't active on your motherboard. Did you purchase two 2x8GB kits? Align the serial numbers so the sticks remain in their original sets. Proceed with two sticks in slots B2 and A2 to test stability. If that works, continue testing all four RAM modules. If it fails, we likely need minor voltage tweaks.

R
Raysns
Member
110
11-30-2022, 03:32 AM
#16
R
Raysns
11-30-2022, 03:32 AM #16

I
iHarleyQuinn_
Member
79
12-07-2022, 05:13 AM
#17
In the event viewer, an error appears: "Dump file creation failed due to error during dump creation." I stopped my PC after a short time because it showed 0%, thinking it had frozen. For next time, I'll wait a bit longer before checking.
I
iHarleyQuinn_
12-07-2022, 05:13 AM #17

In the event viewer, an error appears: "Dump file creation failed due to error during dump creation." I stopped my PC after a short time because it showed 0%, thinking it had frozen. For next time, I'll wait a bit longer before checking.

H
HGK_elshamy
Junior Member
37
12-07-2022, 01:42 PM
#18
I changed the RAM recently and it hasn't crashed after about ten minutes. I purchased the original units around 2020, got another pair later in 2022, and think one from 2020 might be damaged. I haven’t installed the new ones yet. What should I do next?
H
HGK_elshamy
12-07-2022, 01:42 PM #18

I changed the RAM recently and it hasn't crashed after about ten minutes. I purchased the original units around 2020, got another pair later in 2022, and think one from 2020 might be damaged. I haven’t installed the new ones yet. What should I do next?

M
Maxi10170
Junior Member
13
12-11-2022, 05:10 PM
#19
Refer to the earlier message.
M
Maxi10170
12-11-2022, 05:10 PM #19

Refer to the earlier message.

Pages (2): Previous 1 2