F5F Stay Refreshed Power Users Overclocking Galax Gtx 1070 ti ex core clocks and overclocks

Galax Gtx 1070 ti ex core clocks and overclocks

Galax Gtx 1070 ti ex core clocks and overclocks

V
vandalmal
Member
201
12-29-2017, 12:28 AM
#1
I purchased a Galax Gtx 1070 ti ex. On stock configurations, I see core clocks at 1836Mhz and the peak overclock at 1911 Mhz with full fan speed and stock voltage. With an Antec VP650P, I notice these clock speeds are quite low. Could this be due to a suboptimal silicon selection or my power supply? Temperatures drop below 100% load to around 76 degrees.
V
vandalmal
12-29-2017, 12:28 AM #1

I purchased a Galax Gtx 1070 ti ex. On stock configurations, I see core clocks at 1836Mhz and the peak overclock at 1911 Mhz with full fan speed and stock voltage. With an Antec VP650P, I notice these clock speeds are quite low. Could this be due to a suboptimal silicon selection or my power supply? Temperatures drop below 100% load to around 76 degrees.

K
KIRO_HD
Member
216
12-29-2017, 01:50 AM
#2
It reaches 2037 since it improves independently. Performance fluctuates with load and temperature margins. As long as stability is maintained, everything is okay. Just allow the system to operate naturally, similar to an overclock. Good luck
K
KIRO_HD
12-29-2017, 01:50 AM #2

It reaches 2037 since it improves independently. Performance fluctuates with load and temperature margins. As long as stability is maintained, everything is okay. Just allow the system to operate naturally, similar to an overclock. Good luck

S
STQZ
Member
162
12-29-2017, 02:17 AM
#3
No those aren't low.
S
STQZ
12-29-2017, 02:17 AM #3

No those aren't low.

N
neakses
Member
57
12-30-2017, 08:18 AM
#4
What about the max overclocks?
N
neakses
12-30-2017, 08:18 AM #4

What about the max overclocks?

J
joaoplay
Member
141
01-01-2018, 12:20 AM
#5
That's quite a lot, I'm sure you're aware of the outcomes of doing this.
J
joaoplay
01-01-2018, 12:20 AM #5

That's quite a lot, I'm sure you're aware of the outcomes of doing this.

K
Kurogano
Member
183
01-22-2018, 03:00 AM
#6
These are the updated clock readings after the GPU boost 3.0 release.
K
Kurogano
01-22-2018, 03:00 AM #6

These are the updated clock readings after the GPU boost 3.0 release.

C
CLPSGAMER
Member
176
01-27-2018, 07:02 AM
#7
When operating the system, both readings provide valuable information. The core clock from Heaven shows 2037 MHz, while Afterburner displays 1936 MHz. You may want to consider which source aligns better with your specific needs or requirements.
C
CLPSGAMER
01-27-2018, 07:02 AM #7

When operating the system, both readings provide valuable information. The core clock from Heaven shows 2037 MHz, while Afterburner displays 1936 MHz. You may want to consider which source aligns better with your specific needs or requirements.

H
hughesywizard
Member
145
01-28-2018, 06:17 PM
#8
It reaches 2037 since it improves independently. Performance fluctuates with load and temperature margins. As long as stability is maintained, everything is okay. Just allow the system to operate naturally, similar to an overclock. Good luck
H
hughesywizard
01-28-2018, 06:17 PM #8

It reaches 2037 since it improves independently. Performance fluctuates with load and temperature margins. As long as stability is maintained, everything is okay. Just allow the system to operate naturally, similar to an overclock. Good luck