FX 6300 overclocking advice
FX 6300 overclocking advice
I have an FX 6300 with a MSI 750ti and I've started playing battlegrounds. I'm managing around 30 frames on medium without overclocking the GPU. Prices for mining GPUs have risen, but I prefer not to upgrade since I like my card. I'm using a master tx3 cooler and the max stress was about 55°C. If I overclock to 4.0, it might improve frame rates. I've tried AMD Overdrive before reaching 4.2, but now I want exactly 4.0. Should I adjust the BIOS multiplier to x20.0 or use AMD Overdrive?
Make sure your overclock remains stable, whether it's for graphics cards or CPUs. Try tools like Unigine Heaven for stability checks. For the CPU, BIOS offers the best control, but simply adjusting the multiplier might cause problems. Gradually increase values and stress-test with programs such as Prime95 after modifications.
Make sure your overclock remains stable, whether it's for graphics cards or CPUs. Try tools like Unigine Heaven for stability checks. For the CPU, BIOS offers the best control, but simply adjusting the multiplier might cause problems. Gradually increase values and run stress tests with programs such as Prime95 after modifications.
Certainly overclocking from the BIOS and avoid using the automatic option. This increases the required voltage on the v-core, making the chip run hotter and reducing its lifespan.
Manual overclocking is straightforward. Adjust the multiplier to suit your specific chip—each BIOS behaves differently, so I can't provide exact steps. I assume your chip runs at 3.5GHz, meaning a base multiplier of 35 (since 3500MHz equals 1GHz). Since this chip handles overclocking well, start with 40 and test. If it boots, run Prime95. If stable, increase to 41 and check again. Be aware that higher voltages generate more heat, which can cause crashes or damage.
You should aim for the highest stable setting while keeping voltage as low as possible. Excess voltage leads to overheating and potential harm. Personally, I’d keep it below 1.35 volts for my Intel model, though the FX 6300 might support a higher stock voltage.