Function supports full processor state control at 99% accuracy.
Function supports full processor state control at 99% accuracy.
I've checked my HP Omen laptop (17-an012dx, RX 580, i7-7700, 12GB RAM). It's still working well but tends to get warm during normal tasks. Initially, I was concerned about high idle and gaming temps, though the CPU spiked briefly under load. After learning about Intel Turbo Boost, I found a way to limit it to 99% using the Control Panel settings—this stabilized temperatures without sacrificing performance too much. Over time, the temps stayed around 55-65°C during regular use, and even gaming hit 75°C max. Recently, I upgraded to a game that ran smoothly at 1080p with stable frame rates, though lower resolutions were slower. There’s no built-in shortcut for toggling Turbo between 99% and 100%, but adjusting the power plan settings is straightforward. For game optimization, you’d need to tweak launch options or use third-party tools, but it’s not a one-click fix.
The temperatures are good. The CPU stays under 105°C and the GPU is also within safe limits. They’ll adjust the boost frequency if necessary or when things get too warm, so you shouldn’t worry. Have you cleaned your laptop recently? That should help clear out dust from inside the fan and heatsink.
Perfectly fits my needs now, helps me stay comfortable during longer sessions. I haven’t cleaned it yet, so I’m considering upgrading the SSD and RAM—maybe tackle everything at once. Even though temperatures stay within normal ranges, the fans get noticeably louder when things get hotter than 75°C, usually dropping just a bit below full speed and only increasing slightly a couple of times per hour if turbo is off.
These are just laptops in general. They tend to get noisy under heavy use, which is why temperatures rise so quickly—they often throttle the fan speed as much as possible. Disassembling and cleaning them can make a big difference. I strongly suggest using quality thermal paste and reapplying it to the GPU and CPU. Liquid metal could be an option if you're comfortable with it. For a laptop like this, applying conformal coating is a good idea, especially if you go with liquid metal, given its conductive properties. Recently, I cleaned and repasted my mom's old laptop using Noctua H2; it really improved performance. She would get frustrated with the fan when she used it for online activities or video calls with her grandchildren.