F5F Stay Refreshed Hardware Desktop Frequent crashes occurring shortly after system boot

Frequent crashes occurring shortly after system boot

Frequent crashes occurring shortly after system boot

_
_StankoYT_
Junior Member
33
11-02-2021, 02:11 AM
#1
Multiple blue screens appear frequently with various error messages. IRQL_NOT_LESS_THAN_EQUAL is the most frequent issue. Attempted to turn on XMP with DDR5, but the problem continues after resetting the BIOS. Any suggestions?
_
_StankoYT_
11-02-2021, 02:11 AM #1

Multiple blue screens appear frequently with various error messages. IRQL_NOT_LESS_THAN_EQUAL is the most frequent issue. Attempted to turn on XMP with DDR5, but the problem continues after resetting the BIOS. Any suggestions?

S
strelley13
Junior Member
3
11-06-2021, 10:25 PM
#2
Could you share the system specifications and the BIOS version you're using? This will help us identify any memory-related problems.
S
strelley13
11-06-2021, 10:25 PM #2

Could you share the system specifications and the BIOS version you're using? This will help us identify any memory-related problems.

B
bvurth
Junior Member
4
11-12-2021, 10:39 AM
#3
Thank you for the correction.
B
bvurth
11-12-2021, 10:39 AM #3

Thank you for the correction.

G
GaZeVII
Member
141
11-12-2021, 10:46 PM
#4
There have been roughly five BIOS updates since the 0504 9/22 release for that board. If this were my computer, I’d first verify the BIOS settings (even though you chose defaults, it’s good to confirm), then run a Windows memory diagnostic or use a Hirams boot CD to test memory. If everything checks, proceed with updating the BIOS. After that, run the Windows System File Checker (details here: https://support.microsoft.com/en-us/topi...6e85d4094e) and address any issues like driver updates or system patches.
G
GaZeVII
11-12-2021, 10:46 PM #4

There have been roughly five BIOS updates since the 0504 9/22 release for that board. If this were my computer, I’d first verify the BIOS settings (even though you chose defaults, it’s good to confirm), then run a Windows memory diagnostic or use a Hirams boot CD to test memory. If everything checks, proceed with updating the BIOS. After that, run the Windows System File Checker (details here: https://support.microsoft.com/en-us/topi...6e85d4094e) and address any issues like driver updates or system patches.

J
J1son
Member
211
11-12-2021, 11:02 PM
#5
You’re using those high-capacity 48GB drives, but they need BIOS tweaks to work correctly. Install the newest BIOS update—it should resolve the issue, as your version is a year behind and probably causing the problem.
J
J1son
11-12-2021, 11:02 PM #5

You’re using those high-capacity 48GB drives, but they need BIOS tweaks to work correctly. Install the newest BIOS update—it should resolve the issue, as your version is a year behind and probably causing the problem.

J
JohnOchocho
Junior Member
3
11-13-2021, 03:05 AM
#6
For testing, I would apply the intended voltage even when clocks are running at stock speeds without XMP enabled.
J
JohnOchocho
11-13-2021, 03:05 AM #6

For testing, I would apply the intended voltage even when clocks are running at stock speeds without XMP enabled.