Freezing occurs when PC freezes during stock settings after overclocking.

Ion23
Member

170

07-03-2016, 10:47 AM

Hey, here’s what you should do next.

Ion23

07-03-2016, 10:47 AM #1

Hey, here’s what you should do next.

Barrelrollz
Member

133

07-03-2016, 12:14 PM

Have you attempted adjusting the LLC setting to a higher value, as this might indicate a vdroop problem?

Barrelrollz

07-03-2016, 12:14 PM #2

Have you attempted adjusting the LLC setting to a higher value, as this might indicate a vdroop problem?

An_Orin
Member

07-03-2016, 05:14 PM

I was attempting to run level 1 and higher, but it keeps freezing on stock. I'm currently mid-memtest with 38% passing without errors so far.

An_Orin

07-03-2016, 05:14 PM #3

I was attempting to run level 1 and higher, but it keeps freezing on stock. I'm currently mid-memtest with 38% passing without errors so far.

MJTDXMSDD1
Junior Member

07-03-2016, 09:01 PM

I'm hoping for a good result. I believe I can achieve 4.9GHz at 1.278v with a high LLC configuration. My motherboard is a Gigabyte and it has a different LLC setup than usual—high, normal, turbo, or extreme.

MJTDXMSDD1

07-03-2016, 09:01 PM #4

_Skroutz_
Junior Member

07-03-2016, 09:40 PM

Completed memtest three times with a 5:30 h runtime, no issues found. The computer remains unresponsive even when running at stock settings. I previously had a 4.8ghz processor at 1.25v stability. Should I consider returning it for repair?

_Skroutz_

07-03-2016, 09:40 PM #5

Disco_Master
Member

163

07-05-2016, 06:42 PM

Passed memtest three times with a 5:30 h time, no errors found. The PC still freezes at stock settings; I’m unsure what to do. Previously, I ran at 4.8ghz @ 1.25v stable. Should I consider an RMA?

It seems the problem might not be with the CPU itself. If you reset the BIOS by clearing the CMOS and restarting with your first successful 4.8GHz configuration at 1.265v, then test again—only lowering the temperature if everything works.

Also, what CPU cooler are you using?

Disco_Master

07-05-2016, 06:42 PM #6

a11goldenmelon
Junior Member

07-05-2016, 08:20 PM

I'll attempt it. The cooler is SilentiumPC grandis 2, a Polish brand providing solid value for the price.

a11goldenmelon

07-05-2016, 08:20 PM #7

I'll attempt it. The cooler is SilentiumPC grandis 2, a Polish brand providing solid value for the price.

Melvzster
Junior Member

07-06-2016, 11:23 AM

I will attempt it. The cooler is SilentiumPC grandis 2, a Polish brand providing solid value.
I understand... It would be wonderful if you could perform a Prime95 version 26.6 blend test and check the temperatures achieved.

Melvzster

07-06-2016, 11:23 AM #8

PauleyPlayzMC
Junior Member

07-08-2016, 12:16 AM

CMOS cleared, PC stopped working after three hours of use

PauleyPlayzMC

07-08-2016, 12:16 AM #9

CMOS cleared, PC stopped working after three hours of use

Redstorm222
Member

07-11-2016, 09:54 PM

#10

Any suggestions?

Redstorm222

07-11-2016, 09:54 PM #10

Any suggestions?