Freezing issue
Freezing issue
Hello everyone, I’m facing an issue where my PC freezes (no blue screen).
PC components (Windows 10):
COOLER master hyper 212 evo
-FX 8320 4.3ghz | 1,39voltage | CPU RATIO (21.5) | turbo:disabled | CPU BUS FREQ:200 | PCIe freq: AUTO | CPU&NB freq2200 | HT link speed 2200 | CPU load line calibration & CPU/NB ENABLED | CPU spread spectrum ENABLED | PCIe spread spectrum DISABLED | EPU power saving mode DISABLED | CORE C6 State DISABLED | HPC MODE: DISABLED
-16 GB hyperX savage | DRAM TIMING( 12 12 12 31) | 1600mhz
-Power supply: HIGH POWER 750w
-Graphics card: RX 570 4gb
-Motherboard: ASUS m5a97 r2.0
Extra details:
I kept running Prime95 for over an hour without any errors, no core died, and temperatures stayed below 65°C. I exited Prime95 happily since my setup worked fine. After that, I watched a short video for two minutes and it froze—no blue screen. I usually watch videos on YouTube when CPU overclock crashes caused a blue screen, but here I’m only getting a freeze. What should I do? Please advise.