F5F Stay Refreshed Power Users Overclocking For an overclocking setup with an old Q9550, I recommend choosing a suitable CPU cooler to maintain stable temperatures.

For an overclocking setup with an old Q9550, I recommend choosing a suitable CPU cooler to maintain stable temperatures.

For an overclocking setup with an old Q9550, I recommend choosing a suitable CPU cooler to maintain stable temperatures.

Pages (2): Previous 1 2
L
Linkiechu
Member
145
02-17-2016, 09:36 PM
#11
When considering an upgrade, it's important to clearly define your reasons for overclocking and provide complete specifications. Simply using the CPU at higher speeds won't significantly improve performance, especially if your graphics card is weak or RAM is insufficient. For general enhancement, opt for a faster storage solution like a solid state drive.
L
Linkiechu
02-17-2016, 09:36 PM #11

When considering an upgrade, it's important to clearly define your reasons for overclocking and provide complete specifications. Simply using the CPU at higher speeds won't significantly improve performance, especially if your graphics card is weak or RAM is insufficient. For general enhancement, opt for a faster storage solution like a solid state drive.

N
Natsu92004
Junior Member
2
02-18-2016, 06:18 PM
#12
Yes, I'm getting an SSD. From the start of the discussion I chose not to alter the case and kept my old Antec 900. Although it has several issues, it remains a decent case... function over form. Here are the details.
N
Natsu92004
02-18-2016, 06:18 PM #12

Yes, I'm getting an SSD. From the start of the discussion I chose not to alter the case and kept my old Antec 900. Although it has several issues, it remains a decent case... function over form. Here are the details.

L
lemonadebaker
Member
59
02-19-2016, 03:40 AM
#13
Yes, I'm getting an SSD. At the start of the discussion I chose not to alter the case and kept my old Antec 900. Despite its issues, it still works well—function over form. Here are the details:

I plan to buy:
- Your slow "old 2.5" laptop HDD (Hitachi, details unclear, 750gb)
- Likely a 5200rpm drive
- No extra costs beyond a new hard drive
L
lemonadebaker
02-19-2016, 03:40 AM #13

Yes, I'm getting an SSD. At the start of the discussion I chose not to alter the case and kept my old Antec 900. Despite its issues, it still works well—function over form. Here are the details:

I plan to buy:
- Your slow "old 2.5" laptop HDD (Hitachi, details unclear, 750gb)
- Likely a 5200rpm drive
- No extra costs beyond a new hard drive

A
arch98
Junior Member
11
02-20-2016, 08:46 AM
#14
I checked and confirmed it runs at 5400rpm. Even though I anticipate being limited by the older motherboard, I still believed I could boost performance with an SSD. This system previously had a 1TB Seagate 7200RPM HDD before upgrading, so I'm aiming to surpass that capacity.
A
arch98
02-20-2016, 08:46 AM #14

I checked and confirmed it runs at 5400rpm. Even though I anticipate being limited by the older motherboard, I still believed I could boost performance with an SSD. This system previously had a 1TB Seagate 7200RPM HDD before upgrading, so I'm aiming to surpass that capacity.

J
joshet1223
Junior Member
32
02-20-2016, 09:25 AM
#15
I checked it out and confirmed it runs at 5400rpm. I’m aware the older motherboard might slow things down, but I thought I could still boost performance with an SSD. This system previously had a 1TB Seagate 7200RPM HDD before upgrading, so I’m aiming for better than that. I considered overclocking and believe the board should handle it well—SATA connections are fast enough for an SSD without problems.
J
joshet1223
02-20-2016, 09:25 AM #15

I checked it out and confirmed it runs at 5400rpm. I’m aware the older motherboard might slow things down, but I thought I could still boost performance with an SSD. This system previously had a 1TB Seagate 7200RPM HDD before upgrading, so I’m aiming for better than that. I considered overclocking and believe the board should handle it well—SATA connections are fast enough for an SSD without problems.

C
Cramie
Member
238
02-20-2016, 06:24 PM
#16
You're suggesting I skip the overclock since my needs are limited to Spotify, YouTube, Netflix, and regular browsing. I thought it might boost speed for opening and loading, though an SSD already makes a big difference. I also read that the Q9550 has good overclocking potential.
C
Cramie
02-20-2016, 06:24 PM #16

You're suggesting I skip the overclock since my needs are limited to Spotify, YouTube, Netflix, and regular browsing. I thought it might boost speed for opening and loading, though an SSD already makes a big difference. I also read that the Q9550 has good overclocking potential.

S
StreetHobo
Senior Member
568
03-09-2016, 06:35 PM
#17
You're suggesting I skip the overclocking since my typical tasks are light (Spotify, YouTube, Netflix, browsing). I thought it might speed things up a bit. The Q9550 model seems capable of overclocking well. You won't notice any difference in everyday performance. For gaming, though, the biggest gains would come from using an SSD and having a clean Windows environment. Overclocking just adds heat and could shorten the system's lifespan.
S
StreetHobo
03-09-2016, 06:35 PM #17

You're suggesting I skip the overclocking since my typical tasks are light (Spotify, YouTube, Netflix, browsing). I thought it might speed things up a bit. The Q9550 model seems capable of overclocking well. You won't notice any difference in everyday performance. For gaming, though, the biggest gains would come from using an SSD and having a clean Windows environment. Overclocking just adds heat and could shorten the system's lifespan.

X
XEXEXE
Junior Member
15
03-15-2016, 09:38 PM
#18
Obtain a cooler Master HyperX 212 to achieve a solid overclock, and consider using it in your upcoming project.
X
XEXEXE
03-15-2016, 09:38 PM #18

Obtain a cooler Master HyperX 212 to achieve a solid overclock, and consider using it in your upcoming project.

T
TBNRFlameBoy
Junior Member
33
03-17-2016, 08:26 AM
#19
Did you really forget to include the message?
T
TBNRFlameBoy
03-17-2016, 08:26 AM #19

Did you really forget to include the message?

Pages (2): Previous 1 2