F5F Stay Refreshed Hardware Desktop firstpcRyzen 5 3600 specifications at 1°C and higher voltage conditions

firstpcRyzen 5 3600 specifications at 1°C and higher voltage conditions

firstpcRyzen 5 3600 specifications at 1°C and higher voltage conditions

Pages (2): 1 2 Next
R
R3IDx
Member
Find
60
02-26-2019, 02:06 PM
#1
They were setting up his initial gaming machine until a BIOS warning appeared about voltage. After installing the new CPU, it displayed an incorrect temperature reading of -1°C on the first power-on attempt, even though there were no prior problems. He tried other actions now. The setup included a Corsair CV 550 MoBo PSU from Asus B450.
Reply
Reply
R
R3IDx
02-26-2019, 02:06 PM #1

They were setting up his initial gaming machine until a BIOS warning appeared about voltage. After installing the new CPU, it displayed an incorrect temperature reading of -1°C on the first power-on attempt, even though there were no prior problems. He tried other actions now. The setup included a Corsair CV 550 MoBo PSU from Asus B450.

Reply
Reply
T
TheSafeDuck
Junior Member
Find
43
02-26-2019, 10:02 PM
#2
Check the UEFI settings to find the CPU voltage (Vcore or VID). The new CPU might be due to a re-seat or firmware update. Verify the temperature using tools like HWInfo in Windows; matching readings suggest a processor or motherboard issue. Consider re-seating the CMOS and checking for firmware updates.
Reply
Reply
T
TheSafeDuck
02-26-2019, 10:02 PM #2

Check the UEFI settings to find the CPU voltage (Vcore or VID). The new CPU might be due to a re-seat or firmware update. Verify the temperature using tools like HWInfo in Windows; matching readings suggest a processor or motherboard issue. Consider re-seating the CMOS and checking for firmware updates.

Reply
Reply
X
xTripleMinerx
Posting Freak
Find
846
02-27-2019, 02:08 PM
#3
The system freezes during startup and shows a black screen, with a reading of 2.7 volts.
Reply
Reply
X
xTripleMinerx
02-27-2019, 02:08 PM #3

The system freezes during startup and shows a black screen, with a reading of 2.7 volts.

Reply
Reply
L
LissieBear
Member
Find
163
02-27-2019, 05:20 PM
#4
Reply
Reply
L
LissieBear
02-27-2019, 05:20 PM #4

Reply
Reply
A
AlpFG
Member
Find
142
02-27-2019, 07:27 PM
#5
It had begun setting up Windows before the problems arose, but he let it finish on his own. When he returned, everything went back to normal. It’s only a dark screen with no window effects.
Reply
Reply
A
AlpFG
02-27-2019, 07:27 PM #5

It had begun setting up Windows before the problems arose, but he let it finish on his own. When he returned, everything went back to normal. It’s only a dark screen with no window effects.

Reply
Reply
C
CrimsonZel
Member
Find
53
03-17-2019, 05:07 PM
#6
We made the necessary updates and performed a CMOS retest.
Reply
Reply
C
CrimsonZel
03-17-2019, 05:07 PM #6

We made the necessary updates and performed a CMOS retest.

Reply
Reply
K
KIT321
Junior Member
Find
44
03-17-2019, 07:12 PM
#7
This seems completely out of place for me. I’m not sure if the processor can handle such high voltage. Could you reduce the values marked in red? Also, please attempt to boot from a Windows installation media afterward.
Reply
Reply
K
KIT321
03-17-2019, 07:12 PM #7

This seems completely out of place for me. I’m not sure if the processor can handle such high voltage. Could you reduce the values marked in red? Also, please attempt to boot from a Windows installation media afterward.

Reply
Reply
A
adcrash17
Member
Find
132
03-18-2019, 04:28 AM
#8
It seems the motherboard is damaged, causing excessive voltage. Halt the effort and replace it with a different one (avoiding Asus). Hope the CPU functions afterward.
Reply
Reply
A
adcrash17
03-18-2019, 04:28 AM #8

It seems the motherboard is damaged, causing excessive voltage. Halt the effort and replace it with a different one (avoiding Asus). Hope the CPU functions afterward.

Reply
Reply
D
Da_Mathias
Junior Member
Find
37
03-18-2019, 07:46 AM
#9
It seems they might be causing issues by inserting a wire incorrectly, which could lead to loose connections. He mentioned setting up a password in Windows and then turning it off to secure the motherboard inside the case.
Reply
Reply
D
Da_Mathias
03-18-2019, 07:46 AM #9

It seems they might be causing issues by inserting a wire incorrectly, which could lead to loose connections. He mentioned setting up a password in Windows and then turning it off to secure the motherboard inside the case.

Reply
Reply
P
PaigeOfTheBook
Senior Member
Find
733
03-18-2019, 09:49 AM
#10
Second image located in the lower right corner of the display. If those values are accurate, a faulty PSU is likely the cause. I would switch to another PSU and observe if the readings stabilize to +12V, +5V and +3.3V as expected. If another PSU produces identical issues, it might indicate a problem with the motherboard's power regulation. Regarding the processor, because it's crucial (without it you won't boot into BIOS), it appears functional. Verify the PSU first.
Reply
Reply
P
PaigeOfTheBook
03-18-2019, 09:49 AM #10

Second image located in the lower right corner of the display. If those values are accurate, a faulty PSU is likely the cause. I would switch to another PSU and observe if the readings stabilize to +12V, +5V and +3.3V as expected. If another PSU produces identical issues, it might indicate a problem with the motherboard's power regulation. Regarding the processor, because it's crucial (without it you won't boot into BIOS), it appears functional. Verify the PSU first.

Reply
Reply
Pages (2): 1 2 Next