First time overclocking. Tips?

Pages (3): 1 2 3 Next

egigang
Junior Member

02-03-2017, 02:29 PM

Hi guys, I'm starting my first overclocking experience. My setup includes:
ryzen 1600
MSI b350 Tomahawk
Corsair h115i
G. Skill aegis 2400mhz
I tried adjusting in the BIOS but didn't understand how to proceed. I have MSI command center and I'm unsure if overclocking is possible from there. If it is, I want to know how. If not, I need guidance on doing it from the BIOS.

egigang

02-03-2017, 02:29 PM #1

Athame_
Senior Member

734

02-15-2017, 03:59 PM

Try Ryzen master and using your cooler, set it to 1.35v. Increase the clocks as much as possible at that voltage. You should reach around 4ghz. Monitor the temperatures but with the water cooler it shouldn't exceed 50c.

Athame_

02-15-2017, 03:59 PM #2

XxSakura
Junior Member

02-16-2017, 12:24 AM

YouTube is your best friend. It's likely the most popular am4 board, with many videos explaining its use and location. They can offer clearer guidance in text form. If you're using a stock cooler, it's recommended to choose models with 3.7 or 3.6ghz.

XxSakura

02-16-2017, 12:24 AM #3

JamesHond7
Posting Freak

838

02-16-2017, 01:24 AM

Try Ryzen master and using your cooler, set it to 1.35v. Increase the clocks as much as possible at that voltage. You should reach around 4ghz. Monitor temperatures; with the water cooler it shouldn't exceed 50c.

JamesHond7

02-16-2017, 01:24 AM #4

Hanshb3
Member

132

02-16-2017, 02:51 AM

Try Ryzen Master and with your cooler you should just set it to 1.35v. Increase the clocks as much as possible at that voltage. You should reach around 4ghz. Monitor the temperatures but with the water cooler it shouldn't exceed 50c.

Hanshb3

02-16-2017, 02:51 AM #5

madhans
Junior Member

02-16-2017, 09:17 AM

The picture shows Ryzen master. It might be possible that MSI included it in their command center.

madhans

02-16-2017, 09:17 AM #6

The picture shows Ryzen master. It might be possible that MSI included it in their command center.

oatmealaza
Junior Member

02-19-2017, 10:39 PM

At the bottom, next to C, I click it and change my CPU settings to whatever I want. I don’t have to go through two steps in the app to adjust the clocks to the correct frequency.

oatmealaza

02-19-2017, 10:39 PM #7

At the bottom, next to C, I click it and change my CPU settings to whatever I want. I don’t have to go through two steps in the app to adjust the clocks to the correct frequency.

SoloDroid
Member

180

02-20-2017, 09:54 AM

You can store up to five personalized profiles for Ryzen in the Master tool. That's exactly what they are. After configuring it, just click save profile. The initial video demonstrates how to set up Ryzen Master easily. Further adjustments can be made through BIOS overclocking if you wish to take it further.

SoloDroid

02-20-2017, 09:54 AM #8

seeker07
Senior Member

349

02-22-2017, 09:58 AM

So let me ask you this: After completing the overclocking and saving the changes, do you have to restart your computer and enter the BIOS to verify everything is functioning correctly?

seeker07

02-22-2017, 09:58 AM #9

So let me ask you this: After completing the overclocking and saving the changes, do you have to restart your computer and enter the BIOS to verify everything is functioning correctly?

CosmicGeek
Junior Member

02-23-2017, 12:31 AM

#10

Alternatively, you might use CPUz to verify your CPU performance. Considering your overclocking, stability testing with prime95 version 26.6 for roughly ten minutes is recommended. Monitor temperatures using speedfan.
http://www.cpuid.com/
http://www.mersenneforum.org/showthread.php?t=15504
http://www.almico.com/speedfan.php

CosmicGeek

02-23-2017, 12:31 AM #10

Pages (3): 1 2 3 Next