First time Builder seeking a bit of help
First time Builder seeking a bit of help
Hey guys thanks in advance!
This is my first time building a gaming pc and I may have gone a bit overboard but I want to make sure im getting everything right/compatible. Im actually a controls technician for hvac systems so wiring and connections aren’t an issue at all, but this got very complicated quick! Here are my specs.
Intel I7-9700k
ASUS ROG Maximus x Code
ASUS GeForce RTX2080 8gb ROG Strix oc edition
Thermaltake Water3.0 cooler 240mm
250g Samsung 970evo ssd (os)
I tb Samsung 860evo ssd
Seagate ironwolf 6tb
32gb(2x16) Corsair Vengance RGB Pro 3200mhz
EVGA Supernova 750 G3
Thermaltake view 71 case shipped with 3 140mm fans
Still waiting on power supply to arrive so I haven’t even run it once. I’m building this to get into VR and wanted a system that could fully handle it. So my question is, does this all look like a decent system? Haha and secondly am I supplying enough cooling with the three 140mm fans and water cooler or should I look into more? Any help is greatly appreciate! Thanks guys!
Rephrase the following text regarding BIOS flashing on the ROG MAXIMUS X CODE motherboard:
Rephrase the provided text, focusing on clarity and conciseness:
The following outlines the BIOS flashback procedure for the ROG MAXIMUS X CODE motherboard:
1. **Connect USB Drive:** Save the attached M10C.CAP file (previously unzipped from the downloaded archive) to a FAT formatted USB drive. Connect this drive to the designated USB port on the motherboard – refer to page 2-12 of the user manual for its exact location: [https://dlcdnets.asus.com/pub/ASUS/mb/LG...UM_WEB.pdf](https://dlcdnets.asus.com/pub/ASUS/mb/LG...UM_WEB.pdf)
2. **Power On:** Ensure the motherboard and PSU are powered on, *without* starting the board.
3. **Flashback Initiation:** Press and hold the Flashback button for 3 seconds.
4. **Process Completion:** Allow the flash process to complete automatically. Do not interrupt it.