Final recommendations for the AdviceCreator Build?
Final recommendations for the AdviceCreator Build?
This is build is primarily for after effects, 4k+ video editing, cinema 4d + octane, and some unreal engine - looking to get some final feed back on the remaining parts.
I decided to wait for a 5090, and so far I already have:
- AMD Ryzen 9 7950X 4.5 GHz 16-Core Processor
- Aorus x670 elite ax rev 1.3
- ARCTIC Liquid Freezer III 360 56.3 CFM Liquid CPU Cooler
- Three front intake, one rear exhaust - be quiet! Silent Wings 4 51.3 CFM 140 mm Fan
- Fractal Design Meshify 2 XL ATX Full Tower Case
Remaining Parts to buy
- Leaning towards
MSI Ventus GeForce RTX 5090 32GB GDDR7 PCI Express 5.0 Graphics Card RTX 5090 32G VENTUS 3X OC
- I think the sweet spot for stability with my board is DDR5 2×48GB 6000 expo - open to recommendations here
- General plan for storage + external drives for cold storage
Slot
Drive & Capacity
Use Case
M2A_CPU
Samsung 9100 PRO 4 TB (Gen 5)
OS, Adobe + Unreal apps, active project files
M2B_CPU
Samsung 990 PRO 4 TB (Gen 4)
Scratch/cache (AE, Premiere, Octane temp data)
M2C_SB
Samsung 990 PRO 2 TB (Gen 4)
Asset libraries (overlays, LUTs, models, grains, HDRIs)
- Seems like 1200 might be the safe option, open to suggestions here as well
Corsair RM1200x Shift Fully Modular ATX Power Supply - Modular Side Interface - ATX 3.1 & PCIe 5.1 Compliant - Zero RPM Fan Mode - 105°C-Rated Capacitors - 80 Plus Gold Efficiency - Black
I think im pretty close here, just want to get any final thoughts, suggestions. Here is the part picker
https://pcpartpicker.com/list/JvnWsp
Thanks!
I strongly advise steering clear of all MSI Ventus series cards, no matter their specific model. This is particularly true for creators who don’t often wear headphones. The issue lies in the Ventus cards' poor cooling efficiency compared to other families, and they typically rely on cheaper, lower-grade fans that tend to fail sooner than more reliable alternatives. While they’re budget-friendly, the noisy fans and frequent failures make them less attractive.
That said, if you’re willing to spend a bit more, consider the Trio or Tuf Gaming options. These models offer superior heatsinks, better fans, and overall improved cooling. They also sit at a higher mid-tier level than Ventus, bringing additional premium features that the budget Ventus lacks.
For memory, the Ripjaws kit is a solid choice. The chips are top-notch, often matching or exceeding the performance of Trident Z sticks. Although they’re only .667MT/s faster, the difference in true latency (9.333mS vs 10mS) is negligible for most users. Plus, Trident sticks cost more, and G.Skill generally performs better with Ryzen platforms compared to most other memory brands. It’s best to avoid Corsair for Ryzen unless you’re using Dominator sticks, as they usually cause more compatibility problems than the more compatible Ripjaws or Trident Z options.
The rest of the recommendations look reasonable.
Thanks, it’s useful to understand the finer points and compatibility. With so many options out there, it’s tough to see the key differences.
It seems there are several other 5090 models under $3k—do you have any particular suggestions?
This MSI trio is just $10 more.
G.Skill working with Ryzen is a solid tip, and your price is better, plus the RGB is great too.
The MSI ventus and shadow cards work exceptionally well when you remove them and install your own quality 120mm fans. Deshrouding can be achieved in several ways, and it isn't too complicated if it helps you save more than $100 on another card. Here is the neat method, and here is the less appealing one that still delivers great results.
I understand, though I personally think so. By the time you invest all that effort, spending on 3d printing materials, buying good fans, etc., it would seem more worthwhile to spend an extra 100 dollars on a better model. Considering other factors beyond cooling setup, mid-tier cards often offer advantages such as improved heatsinks, higher binned silicon for better performance or longer stability, and premium parts like better caps. Unless you really need a Ventus card, it makes sense to avoid it. Even then, planning for specific hardware—like a costly PSU, motherboard, or memory—can be problematic. It’s a good idea to think about these things before committing.
Yeah, price and availability are the key factors. I wanted to let you know that the ventus can be modified to save money compared to higher performance 5090 variants that cost much more. If a significantly better stock card is under $50, then this mod isn't worth it. When there aren't many options or other models are over $100 more, it makes sense. Also, if you have a few spare 120mm fans on hand, the mod becomes almost free, aside from the time needed to install them.
I don’t have a strong preference for any particular brand or model unless you have a recommendation under 3k.
I’m not certain if I missed your previous message.
I would consider obtaining the MSI Vanguard SOC 5090 if you are not willing or unable to uncover the ventus. It has been verified as one of the most impressive and quiet stock cards without an AIO cooler.
PCPartPicker Part List
CPU:
AMD Ryzen 9 7950X 4.5 GHz 16-Core Processor
($448.94 @ Newegg)
CPU Cooler:
ARCTIC Liquid Freezer III Pro 360 77 CFM Liquid CPU Cooler
($84.99 @ Amazon)
Motherboard:
Gigabyte X670 AORUS ELITE AX ATX AM5 Motherboard
($239.99 @ Amazon)
Memory:
G.Skill Flare X5 96 GB (2 x 48 GB) DDR5-6000 CL30 Memory
($329.99 @ Amazon)
Storage:
Samsung 990 Pro 2 TB M.2-2280 PCIe 4.0 X4 NVME SSD
($154.99 @ Newegg)
Storage:
Samsung 990 Pro 4 TB M.2-2280 PCIe 4.0 X4 NVME SSD
($294.99 @ Amazon)
Storage:
Samsung 9100 PRO 4 TB M.2-2280 PCIe 5.0 X4 NVME SSD
($429.99 @ Abt)
Video Card:
MSI VANGUARD SOC GeForce RTX 5090 32 GB Video Card
($2799.99 @ Amazon)
Case:
Fractal Design Meshify 2 XL ATX Full Tower Case
($204.99 @ Amazon)
Power Supply:
Corsair RM1200x SHIFT 1200 W 80+ Gold Certified Fully Modular Side Interface ATX Power Supply
($229.99 @ B&H)
Total: $5218.85
Prices cover shipping, taxes, and applicable discounts
Generated by PCPartPicker
2025-07-29 14:07 EDT-0400