Final configuration with all cores and undervoltage applied.

Pages (3): 1 2 3 Next

Loyal_KindTPN
Junior Member

12-08-2019, 02:27 AM

The situation seems normal. The Ryzen 5 3600 with 4.0GHz all-core overclocking at 1.2V is within typical performance ranges, and the EDC showing 90A during stress tests aligns with expected power usage. The difference between 100% and 2xA at stock may reflect testing conditions rather than a problem. No major issues here.

Loyal_KindTPN

12-08-2019, 02:27 AM #1

B1ackops
Junior Member

12-08-2019, 03:47 AM

Are all core boosts or tweaks applied? 2xxA, yet the stock voltage seems to be around 1.099v instead of the expected 1.2v. Something’s happening.

B1ackops

12-08-2019, 03:47 AM #2

Are all core boosts or tweaks applied? 2xxA, yet the stock voltage seems to be around 1.099v instead of the expected 1.2v. Something’s happening.

David11345678
Junior Member

12-22-2019, 05:36 PM

Bpo is turned off in the BIOS. Adjust all cores manually. Apply 1.2v setting in BIOS. Unclear about RM behavior. 2xxA ran at 1.375v near that point.

David11345678

12-22-2019, 05:36 PM #3

Bpo is turned off in the BIOS. Adjust all cores manually. Apply 1.2v setting in BIOS. Unclear about RM behavior. 2xxA ran at 1.375v near that point.

Stampede_Ace_2
Member

12-23-2019, 10:13 AM

The latest BIOS version exists, though several tracking efforts may show discrepancies. I also adjust BIOS settings myself for performance gains. Nice work!

Stampede_Ace_2

12-23-2019, 10:13 AM #4

The latest BIOS version exists, though several tracking efforts may show discrepancies. I also adjust BIOS settings myself for performance gains. Nice work!

tnt_Crafter012
Junior Member

12-24-2019, 08:31 PM

Displaying 90A with XFR and PBO disabled prevents it from dropping below 100%. This is likely due to a CPU power plan set at 100% minimum, ensuring the CPU runs at full speed unless necessary.

tnt_Crafter012

12-24-2019, 08:31 PM #5

Displaying 90A with XFR and PBO disabled prevents it from dropping below 100%. This is likely due to a CPU power plan set at 100% minimum, ensuring the CPU runs at full speed unless necessary.

calbear86
Member

156

12-25-2019, 12:56 PM

the bios on mine is, and does the same thing. trying to sort my sons system out before he flys home. trying to keep the temps downs as its in a Dan case. All i change was the vcore and cpu speed, is there anything else i need to change?

calbear86

12-25-2019, 12:56 PM #6

Zhou_Jun_Da
Junior Member

12-25-2019, 04:38 PM

The image has passed the stress test. It should be fine. Let me know if you need anything else!

Zhou_Jun_Da

12-25-2019, 04:38 PM #7

The image has passed the stress test. It should be fine. Let me know if you need anything else!

Beybladenyc
Junior Member

12-30-2019, 02:17 AM

The CPU frequency falls below 4GHz during idle mode, and the EDC percentage drops under 100% when idle.

Beybladenyc

12-30-2019, 02:17 AM #8

The CPU frequency falls below 4GHz during idle mode, and the EDC percentage drops under 100% when idle.

iTC_One
Junior Member

12-31-2019, 05:02 PM

It reduces during idle and the ECU follows that too.

iTC_One

12-31-2019, 05:02 PM #9

It reduces during idle and the ECU follows that too.

Pedro_Plays17
Junior Member

01-09-2020, 05:15 PM

#10

I don't see an issue then, when you manually OC you some how disabled XFR. Thats why EDC wen from 2xx down to 90a

Pedro_Plays17

01-09-2020, 05:15 PM #10

I don't see an issue then, when you manually OC you some how disabled XFR. Thats why EDC wen from 2xx down to 90a

Pages (3): 1 2 3 Next