Failure in catastrophic windows version 10
Failure in catastrophic windows version 10
If the system can't locate a USB drive in BIOS, it suggests a fundamental issue. Windows might struggle to detect USB devices at the lowest levels because this layer is very close to physical hardware, preventing direct access.
Perform a clean installation of Windows. If you require the files, remove the storage drive and connect it to another computer running a functional OS. Use the official Windows Media Creation Tool to generate a bootable USB from a different machine, avoiding Rufus. Advanced startup settings should allow selecting one-time boot from a connected USB drive.
Hi @Enderman Your feedback is accurate. Despite using an official Windows USB from another laptop and trying Rufus and other tools, the system still doesn’t recognize the connected drive. It seems like the BIOS or boot settings aren’t being detected. You might want to try a different USB port or check if the drive is properly seated. If that doesn’t work, consider using a different method or consulting technical support. Thanks for sharing your experience!
Do you have a desktop and an M.2 port? Yes, then remove the SSD from the laptop and connect it to your desktop. Start with your primary drive so you can access the SSD and transfer the data. If your desktop lacks an M.2 slot, they likely sell M.2 to USB adapters, which you can obtain to facilitate copying. Regarding USB not booting, it might be because the BIOS CSM isn't enabled—turn it on and attempt again. Another option is to boot from a CD.