Failed to start system – latest build released – NZXT H7 Flow paired with new AIO, GPU, and case.
Failed to start system – latest build released – NZXT H7 Flow paired with new AIO, GPU, and case.
Hey there! You're facing some tricky problems with your new PC setup. It's normal to feel a bit lost when starting out, especially with all the components involved. I understand you've double-checked the connections and cables, but since you're still having issues, let's go through a few more checks. Have you tried booting into BIOS/UEFI to confirm the system powers on at all? Also, make sure the power button is fully pressed and that the indicator lights are responding. If everything looks good there, it might be a hardware issue or a loose connection somewhere else. Let me know what happens next!
Rocker switch located at the back of the PSU? The header connections seem fine, but nothing functions. It’s simple to remove a pin and still have issues. Some boards include a chassis intrusion header that blocks power. If your setup has this and one front panel connector is connected to one of those pins, it could be the cause.
Thanks for the update. The rocker switch is now active. It looks like everything is connected properly. In my earlier setup, I had multiple front-panel connectors, but here they only have an F_Panel connector that fits the same slots and likely serves the same functions as several of those before. According to the motherboard manual, it should work fine once plugged in correctly.