F5F Stay Refreshed Hardware Desktop Failed to launch BIOS after updating to version 2

Failed to launch BIOS after updating to version 2

Failed to launch BIOS after updating to version 2

Pages (3): Previous 1 2 3
T
TheShadowGames
Junior Member
18
11-16-2021, 08:15 AM
#21
The issue persists
T
TheShadowGames
11-16-2021, 08:15 AM #21

The issue persists

I
iitzsolid
Member
79
11-16-2021, 08:15 AM
#22
You haven't shared your hardware configuration. Please list the parts you're using. Regarding the BIOS, you need to access it because it's necessary for installation steps like setting up NvMe or updating firmware. It’s not just about the boot logo; it ensures proper system setup. If you don’t have an HD installed, the system will automatically enter BIOS—this is built into the design. Updating the BIOS to the latest version and resetting settings can help resolve issues. Without specific details, it's hard to give targeted advice.
I
iitzsolid
11-16-2021, 08:15 AM #22

You haven't shared your hardware configuration. Please list the parts you're using. Regarding the BIOS, you need to access it because it's necessary for installation steps like setting up NvMe or updating firmware. It’s not just about the boot logo; it ensures proper system setup. If you don’t have an HD installed, the system will automatically enter BIOS—this is built into the design. Updating the BIOS to the latest version and resetting settings can help resolve issues. Without specific details, it's hard to give targeted advice.

J
JureCar11
Junior Member
47
11-16-2021, 08:15 AM
#23
Don't stress, everything worked out now. I enabled RAID mode, inserted it into the dedicated slot on the motherboard, and it showed up in the Windows boot menu.
J
JureCar11
11-16-2021, 08:15 AM #23

Don't stress, everything worked out now. I enabled RAID mode, inserted it into the dedicated slot on the motherboard, and it showed up in the Windows boot menu.

X
xConnork
Junior Member
27
11-16-2021, 08:15 AM
#24
Excellent work!
X
xConnork
11-16-2021, 08:15 AM #24

Excellent work!

H
hugowag800
Junior Member
6
11-16-2021, 08:15 AM
#25
You're facing an issue after swapping your boot drive from an Intel 660P NVMe SSD to a Western Digital S550. When the S550 boots, you see the ASUS logo and can't access BIOS or install Windows via USB. Only the power button works to shut down. It's unclear if this will resolve on its own; support from ASUS is pending. Both devices use the same NVMe M.2 standard, though the S550 supports Gen3x4 while the 660P is Gen3x2.
H
hugowag800
11-16-2021, 08:15 AM #25

You're facing an issue after swapping your boot drive from an Intel 660P NVMe SSD to a Western Digital S550. When the S550 boots, you see the ASUS logo and can't access BIOS or install Windows via USB. Only the power button works to shut down. It's unclear if this will resolve on its own; support from ASUS is pending. Both devices use the same NVMe M.2 standard, though the S550 supports Gen3x4 while the 660P is Gen3x2.

Pages (3): Previous 1 2 3