F5F Stay Refreshed Power Users Networks Facing issues with weak signal and slow speeds? Let's troubleshoot together.

Facing issues with weak signal and slow speeds? Let's troubleshoot together.

Facing issues with weak signal and slow speeds? Let's troubleshoot together.

Pages (2): 1 2 Next
I
i_am_awsome10
Junior Member
23
02-26-2016, 10:25 AM
#1
Good evening. I've faced similar problems with my wireless setup for six months, struggling to improve speeds despite good router signals. When connected directly to the modem, downloads reach 100 Mbps, but at home the connection drops to just 5 Mbps. The network feels very slow, especially with everyone streaming and health issues affecting performance. I've reset the router, changed channels, and adjusted frequencies, but nothing seems to work. Could you suggest any possible fixes? Thanks!
I
i_am_awsome10
02-26-2016, 10:25 AM #1

Good evening. I've faced similar problems with my wireless setup for six months, struggling to improve speeds despite good router signals. When connected directly to the modem, downloads reach 100 Mbps, but at home the connection drops to just 5 Mbps. The network feels very slow, especially with everyone streaming and health issues affecting performance. I've reset the router, changed channels, and adjusted frequencies, but nothing seems to work. Could you suggest any possible fixes? Thanks!

L
llegal
Junior Member
42
03-05-2016, 02:18 AM
#2
Are you sure? Most people would suggest different answers, but if I were you, I'd grumble to your provider about this. Ultimately, they promise a specific standard through their SLAs, meaning the issue could lie with them.
L
llegal
03-05-2016, 02:18 AM #2

Are you sure? Most people would suggest different answers, but if I were you, I'd grumble to your provider about this. Ultimately, they promise a specific standard through their SLAs, meaning the issue could lie with them.

B
bellaaa_
Member
173
03-07-2016, 06:09 AM
#3
I don't agree with this method. If he's already connected directly to the ISP's point (like a modem) and achieves the expected speed, then the ISP won't need to worry about it further. The rest is customer equipment. Also, is the ISP gear a modem or a router? I’d prefer to ensure nothing else is attached or to use your Linksys router for the connection, then test with just your problematic device. That way, other factors are ruled out. Since you're not seeing issues with signal during tests, bandwidth should be the main focus. If you've already reset the router, it's likely not a settings issue on the Linksys unit. In this scenario, starting troubleshooting from the ISP side might be most effective, given you've verified a direct connection provides the speed.
B
bellaaa_
03-07-2016, 06:09 AM #3

I don't agree with this method. If he's already connected directly to the ISP's point (like a modem) and achieves the expected speed, then the ISP won't need to worry about it further. The rest is customer equipment. Also, is the ISP gear a modem or a router? I’d prefer to ensure nothing else is attached or to use your Linksys router for the connection, then test with just your problematic device. That way, other factors are ruled out. Since you're not seeing issues with signal during tests, bandwidth should be the main focus. If you've already reset the router, it's likely not a settings issue on the Linksys unit. In this scenario, starting troubleshooting from the ISP side might be most effective, given you've verified a direct connection provides the speed.

L
Livvy88
Junior Member
33
03-08-2016, 12:57 PM
#4
You achieve maximum 100 Mbps speed via your router using an Ethernet connection? The above message seems inaccurate—your ISP should be able to deliver full speed through the modem. This indicates the ISP side is functioning, but your local network isn’t. If you see full speeds when connecting with a wired link, the issue likely lies with Wi-Fi interference or a problem with the router itself. If you don’t reach maximum speeds regardless of connection type, it suggests a serious fault with the router or its configuration.
L
Livvy88
03-08-2016, 12:57 PM #4

You achieve maximum 100 Mbps speed via your router using an Ethernet connection? The above message seems inaccurate—your ISP should be able to deliver full speed through the modem. This indicates the ISP side is functioning, but your local network isn’t. If you see full speeds when connecting with a wired link, the issue likely lies with Wi-Fi interference or a problem with the router itself. If you don’t reach maximum speeds regardless of connection type, it suggests a serious fault with the router or its configuration.

G
gabrys0809
Member
69
03-08-2016, 07:30 PM
#5
The ISP gear functions as a modem. The router was bought several years back, nothing likely to need changing. The main concern is that my neighbor’s house has many access points on Channels 1, 6, and 11, possibly leading to some problems. So far, I think I’ve tried adjusting all the router settings without success. Currently, the biggest issue is limited bandwidth, making it hard to stream from an Amazon Fire Stick while also handling video calls simultaneously.
G
gabrys0809
03-08-2016, 07:30 PM #5

The ISP gear functions as a modem. The router was bought several years back, nothing likely to need changing. The main concern is that my neighbor’s house has many access points on Channels 1, 6, and 11, possibly leading to some problems. So far, I think I’ve tried adjusting all the router settings without success. Currently, the biggest issue is limited bandwidth, making it hard to stream from an Amazon Fire Stick while also handling video calls simultaneously.

_
_Kiste_
Junior Member
3
03-16-2016, 01:15 AM
#6
It functions properly on the local network. The problem lies with the available bandwidth and the wireless link.
_
_Kiste_
03-16-2016, 01:15 AM #6

It functions properly on the local network. The problem lies with the available bandwidth and the wireless link.

M
MilaMaya
Junior Member
49
03-16-2016, 04:54 PM
#7
You're asking about your Wi-Fi setup and connectivity. It sounds like you want to know if your network works well when connected via Ethernet directly to the router, regardless of distance from it. You also mentioned potential issues with streaming on nearby devices. Clarify if you need tips for improving range or troubleshooting streaming performance.
M
MilaMaya
03-16-2016, 04:54 PM #7

You're asking about your Wi-Fi setup and connectivity. It sounds like you want to know if your network works well when connected via Ethernet directly to the router, regardless of distance from it. You also mentioned potential issues with streaming on nearby devices. Clarify if you need tips for improving range or troubleshooting streaming performance.

A
Affe001
Junior Member
4
03-16-2016, 08:53 PM
#8
It typically reaches around 70-80 on wired connections. The router performs best about 10-15 feet away from the wall, then decreases to 1-5 feet depending on the floor level.
A
Affe001
03-16-2016, 08:53 PM #8

It typically reaches around 70-80 on wired connections. The router performs best about 10-15 feet away from the wall, then decreases to 1-5 feet depending on the floor level.

T
TheGamingDino_
Junior Member
6
03-17-2016, 06:24 AM
#9
In general, the only options mentioned are Moca adapters, which stand for 'multi media over coaxial.' They’re said to improve your WiFi signal, though I don’t have much detail beyond that because I haven’t used one. You might also try a Wi-Fi extender in combination with them. The video below should give you a better understanding.
T
TheGamingDino_
03-17-2016, 06:24 AM #9

In general, the only options mentioned are Moca adapters, which stand for 'multi media over coaxial.' They’re said to improve your WiFi signal, though I don’t have much detail beyond that because I haven’t used one. You might also try a Wi-Fi extender in combination with them. The video below should give you a better understanding.

M
Marinated
Senior Member
666
03-20-2016, 03:55 AM
#10
These videos are really useful. Appreciate the suggestion. Would it be more effective to connect directly to devices via MoCA, or should you route it through a second story with an access point or extender?
M
Marinated
03-20-2016, 03:55 AM #10

These videos are really useful. Appreciate the suggestion. Would it be more effective to connect directly to devices via MoCA, or should you route it through a second story with an access point or extender?

Pages (2): 1 2 Next