Extract heatspreader from Ram
Extract heatspreader from Ram
Hello! Your Patriot Viper Venom DDR5-6000 CL36 kit has a 43mm height, which makes the NH-D15 module unsuitable due to its limited clearance. The Dark Rock Pro 4 also falls short with only 40mm clearance. Removing the heatspreader from the RAM modules is both practical and effective—heat isn’t just for show if you’re running at high frequencies. For a 13600K build, I recommend looking into cooler options that fit your chassis, such as high-end air coolers or liquid cooling solutions designed for overclocking.
Based on the available space, you can relocate the RAM to slots 2 and 3 or 3 and 4 rather than the usual 1 and 3 slots.
Heat spreaders aren't essential, yet they make sense. DDR5 generates significant heat because of the built-in power management IC, though it doesn't create much warmth on its own—it still requires cooling if you aim for voltages beyond JEDEC standards. Also, taking out heat spreaders can cancel your warranty and is prone to mistakes. If increasing fan speed isn't enough, the Scythe Fuma 2 offers strong performance with solid memory support and nearly matches the capabilities of an NH-D15.
Sounds good! I’ll go with the NH-D15 and try to boost the fan. If that doesn’t help, I’ll switch to a 120mm. Should be fine.
This would force the RAM into single-channel operation. Not a good choice.
It relies on the specific motherboard, so the most important step is to review the manual that came with it for correct installation.