External power control switch
External power control switch
Connect the components to your motherboard by following the instructions on the provided links. Make sure you match the pinouts and wiring as specified.
I hope the description makes sense. The diagram in the pictures seems a bit confusing for me. Please verify with a multimeter—seems you should connect the power switch to the green and black wires. You should notice the switch changing state on those wires when you press the button (in ohms or continuity mode). *Note* one reviewer actually confirmed this description matches the image.
The power button functions as a brief switch linking the two button pins when pressed. This explains why touching a metal object or tool to it can start the system. Identify the two wires that act as the temporary connection, then match them to the motherboard’s front panel header on the power switch pins. Additional wires are present to power the LEDs. It likely requires 12 volts, obtainable from a 4-pin Molex connector. Once connected, the button will stay lit while the PC is active.