F5F Stay Refreshed Power Users Networks Extend Ethernet with multiple routers for improved connectivity.

Extend Ethernet with multiple routers for improved connectivity.

Extend Ethernet with multiple routers for improved connectivity.

J
jesselove5
Member
81
01-31-2016, 06:08 PM
#1
I’m planning to begin my online animation graduate program this fall, and my dad and I are considering reorganizing our dining room into my new office. Since I need strong hardware and a reliable internet connection for gaming, I’d like to have Ethernet available in the office. We recently replaced our old router’s wireless signal, but it still worked fine, so we have an extra router on hand. Near my office there’s an unused coax port from several years ago—we use Cox for both internet and cable, so it seems capable of handling a signal. I’m not sure if that would really help, but it could be useful.

My new router is much more powerful and offers more bandwidth, yet many devices still can’t use it fully. There’s also some signal loss because the router is on the opposite side of the house on the first floor, far from the building’s center. My dad’s computer only supports 2.4GHz, so even if we set up a second Ethernet connection, he wouldn’t benefit unless we can extend the wired link.

I’m not very familiar with networking compared to PCs, so I’m open to suggestions. Would it be possible to install a second Ethernet connection using the spare coax port? Or are there other options we should explore?
J
jesselove5
01-31-2016, 06:08 PM #1

I’m planning to begin my online animation graduate program this fall, and my dad and I are considering reorganizing our dining room into my new office. Since I need strong hardware and a reliable internet connection for gaming, I’d like to have Ethernet available in the office. We recently replaced our old router’s wireless signal, but it still worked fine, so we have an extra router on hand. Near my office there’s an unused coax port from several years ago—we use Cox for both internet and cable, so it seems capable of handling a signal. I’m not sure if that would really help, but it could be useful.

My new router is much more powerful and offers more bandwidth, yet many devices still can’t use it fully. There’s also some signal loss because the router is on the opposite side of the house on the first floor, far from the building’s center. My dad’s computer only supports 2.4GHz, so even if we set up a second Ethernet connection, he wouldn’t benefit unless we can extend the wired link.

I’m not very familiar with networking compared to PCs, so I’m open to suggestions. Would it be possible to install a second Ethernet connection using the spare coax port? Or are there other options we should explore?

G
goolst2003
Member
217
01-31-2016, 07:44 PM
#2
Consider using powerline network adapters.
G
goolst2003
01-31-2016, 07:44 PM #2

Consider using powerline network adapters.

I
icgreent
Junior Member
2
02-02-2016, 09:22 AM
#3
There are several options for handling the coax in this scenario: Install a separate modem, which separates the router networks and requires two service plans (unless discounts apply), or use MoCA adaptors that function similarly to powerline but via coax. MoCA 2.0 works alongside DOCSIS3 and TV signals on the same coax cable. Actiontec is the only consumer-grade MoCA 2.0 adaptor manufacturer. Consider upgrading to a Cox Panoramic Wi-Fi modem and adding a Panoramic extender for your office. This setup uses MoCA internally but simplifies the process compared to building it yourself. The Panoramic system offers performance similar to mesh Wi-Fi systems that rely on wired backhaul rather than wireless. The extenders include two gigabit Ethernet ports, and additional switches can be connected as needed.
I
icgreent
02-02-2016, 09:22 AM #3

There are several options for handling the coax in this scenario: Install a separate modem, which separates the router networks and requires two service plans (unless discounts apply), or use MoCA adaptors that function similarly to powerline but via coax. MoCA 2.0 works alongside DOCSIS3 and TV signals on the same coax cable. Actiontec is the only consumer-grade MoCA 2.0 adaptor manufacturer. Consider upgrading to a Cox Panoramic Wi-Fi modem and adding a Panoramic extender for your office. This setup uses MoCA internally but simplifies the process compared to building it yourself. The Panoramic system offers performance similar to mesh Wi-Fi systems that rely on wired backhaul rather than wireless. The extenders include two gigabit Ethernet ports, and additional switches can be connected as needed.

P
ProTimmy
Member
123
02-05-2016, 10:33 PM
#4
Great! I'll take a closer look at those.
P
ProTimmy
02-05-2016, 10:33 PM #4

Great! I'll take a closer look at those.

A
Alan4041
Member
210
02-13-2016, 09:53 PM
#5
Other great options include the Cox Moca setup—it’s easier to manage and backed by their team. If you prefer a hands-on approach, going through Moca yourself could be a fun challenge.
A
Alan4041
02-13-2016, 09:53 PM #5

Other great options include the Cox Moca setup—it’s easier to manage and backed by their team. If you prefer a hands-on approach, going through Moca yourself could be a fun challenge.

S
SuBTaX_YTB
Member
52
02-14-2016, 08:11 PM
#6
Looking for the Adaptec bonded Ethernet adapter? This product is available on Amazon with the model ECB6200S02.
S
SuBTaX_YTB
02-14-2016, 08:11 PM #6

Looking for the Adaptec bonded Ethernet adapter? This product is available on Amazon with the model ECB6200S02.

S
SayNoToNWO
Posting Freak
879
02-15-2016, 04:49 AM
#7
Exactly, that's the point I was making in my second option.
S
SayNoToNWO
02-15-2016, 04:49 AM #7

Exactly, that's the point I was making in my second option.