Expo is really overwhelming. Do you have any suggestions?

F5F Stay Refreshed Hardware Desktop Expo is really overwhelming. Do you have any suggestions?

Expo is really overwhelming. Do you have any suggestions?

Expo is really overwhelming. Do you have any suggestions?

V

Volkaninat_07
Junior Member

28

05-19-2019, 05:28 PM

#1

My settings are all locked in. After trying to share, the bios ends up in safe mode and warns me to change things. Before switching to newer BIOS versions (following the ASUS VSOC controversy), I was able to run RAM at 6200MHz with manual speed control and auto left on. Without using expo profiles, I thought it would work fine. After upgrading to the latest BIOS, the best I got was 5800MHz with auto enabled, but I still needed to turn on ASUS Performance Enhancement. Even then, any expo profile still fails to post. I updated my RAM firmware thinking there might be a problem, but it didn’t help. Other than that, I’m confused. It seems the system probably restricts VSOC so much now that 6200MHz isn’t working at all. Why would anyone expect me to post with expo enabled when it’s unstable? I really need advice—I want speeds I actually paid for!

V

Volkaninat_07

05-19-2019, 05:28 PM #1

My settings are all locked in. After trying to share, the bios ends up in safe mode and warns me to change things. Before switching to newer BIOS versions (following the ASUS VSOC controversy), I was able to run RAM at 6200MHz with manual speed control and auto left on. Without using expo profiles, I thought it would work fine. After upgrading to the latest BIOS, the best I got was 5800MHz with auto enabled, but I still needed to turn on ASUS Performance Enhancement. Even then, any expo profile still fails to post. I updated my RAM firmware thinking there might be a problem, but it didn’t help. Other than that, I’m confused. It seems the system probably restricts VSOC so much now that 6200MHz isn’t working at all. Why would anyone expect me to post with expo enabled when it’s unstable? I really need advice—I want speeds I actually paid for!

S

Stjernekraft
Junior Member

18

05-20-2019, 01:24 AM

#2

call upon the ram deities. consider switching to a different brand for the ram. it could be a quality problem.

S

Stjernekraft

05-20-2019, 01:24 AM #2

call upon the ram deities. consider switching to a different brand for the ram. it could be a quality problem.

P

pinkpicaxe
Junior Member

18

05-22-2019, 01:02 AM

#3

Based on what I've observed, these recent BIOS versions seem to struggle with memory performance, which probably explains the issue. I recommend using your 5800 profile until newer updates are released, then upgrade accordingly.

P

pinkpicaxe

05-22-2019, 01:02 AM #3

Based on what I've observed, these recent BIOS versions seem to struggle with memory performance, which probably explains the issue. I recommend using your 5800 profile until newer updates are released, then upgrade accordingly.

D

DenizFTW
Junior Member

11

06-11-2019, 04:23 PM

#4

Verify your VSOC level and consider boosting it slightly—some 3D chips handle up to 1.3V or more.

D

DenizFTW

06-11-2019, 04:23 PM #4

Verify your VSOC level and consider boosting it slightly—some 3D chips handle up to 1.3V or more.

S

sammmi909
Member

55

06-11-2019, 05:45 PM

#5

Hi, I have similar built, same problem, AMD R5 7600/ Asus tuf Gaming b650 wifi plus/ Trident Z5 Neo RGB DDR5- 6000 CL30 -38-38-96 1.35V 32GB (2x16GB) AMD EXPO. I tired many things without succes, updating bios, firmware, etc. I ended using the default speed 4800 mt/s but I manage to drive down latency to size the CL30 and at least I can enjoy that while I´m waitting for some one to showme a trick or a bios update that fix the problem, last time I check in asus tuf gaming b650 wifi plus ram support I still dont see my lattency/speed of ram

S

sammmi909

06-11-2019, 05:45 PM #5

Hi, I have similar built, same problem, AMD R5 7600/ Asus tuf Gaming b650 wifi plus/ Trident Z5 Neo RGB DDR5- 6000 CL30 -38-38-96 1.35V 32GB (2x16GB) AMD EXPO. I tired many things without succes, updating bios, firmware, etc. I ended using the default speed 4800 mt/s but I manage to drive down latency to size the CL30 and at least I can enjoy that while I´m waitting for some one to showme a trick or a bios update that fix the problem, last time I check in asus tuf gaming b650 wifi plus ram support I still dont see my lattency/speed of ram