F5F Stay Refreshed Hardware Desktop Explore the cooling solutions and B350 PBO configurations available.

Explore the cooling solutions and B350 PBO configurations available.

Explore the cooling solutions and B350 PBO configurations available.

Pages (2): Previous 1 2
A
Andrewlol10PT
Member
53
08-06-2022, 10:47 PM
#11
A
Andrewlol10PT
08-06-2022, 10:47 PM #11

S
SkyGamer62
Member
79
08-08-2022, 02:49 AM
#12
The nhu12s isn't sufficient for a 5800x3d setup; you'll need a superior cooler. Also, the CPU doesn't officially support any changes to frequency or voltage.
S
SkyGamer62
08-08-2022, 02:49 AM #12

The nhu12s isn't sufficient for a 5800x3d setup; you'll need a superior cooler. Also, the CPU doesn't officially support any changes to frequency or voltage.

C
csige791
Posting Freak
818
08-09-2022, 11:33 AM
#13
No CPU officially supports voltage changes, correct? I didn't consider the 5800X3D or B350's PBO limits, so manual negative voltage offset and/or improved cooling are the only solutions.
C
csige791
08-09-2022, 11:33 AM #13

No CPU officially supports voltage changes, correct? I didn't consider the 5800X3D or B350's PBO limits, so manual negative voltage offset and/or improved cooling are the only solutions.

L
LupusGladiator
Member
183
08-10-2022, 07:14 PM
#14
The issue is resolved at the BIOS level because of its design. Better cooling is the solution, unfortunately.
L
LupusGladiator
08-10-2022, 07:14 PM #14

The issue is resolved at the BIOS level because of its design. Better cooling is the solution, unfortunately.

N
Netfwix
Junior Member
42
08-13-2022, 05:22 PM
#15
Using the PBO2 tuner app shows results. Reducing -15 across all cores by about 5°C during load (from 84-85°C) keeps temperatures stable and remains consistent. I haven’t gone below that point. The problem is needing to start and tune the program each time it launches. @jaslion I’m considering a 280mm AIO instead of my current Noctua. @Imprezzion lowering the negative Vcore to 1.3v from 1.4v could help. I’ll do more testing tonight.
N
Netfwix
08-13-2022, 05:22 PM #15

Using the PBO2 tuner app shows results. Reducing -15 across all cores by about 5°C during load (from 84-85°C) keeps temperatures stable and remains consistent. I haven’t gone below that point. The problem is needing to start and tune the program each time it launches. @jaslion I’m considering a 280mm AIO instead of my current Noctua. @Imprezzion lowering the negative Vcore to 1.3v from 1.4v could help. I’ll do more testing tonight.

E
Easter2k16
Junior Member
15
08-14-2022, 10:11 PM
#16
An ak620 is also a great option, priced around 40-50$.
E
Easter2k16
08-14-2022, 10:11 PM #16

An ak620 is also a great option, priced around 40-50$.

E
Eusebio06
Senior Member
595
08-15-2022, 02:57 AM
#17
Got it, sending back the Noctua and placing the AK620 order. Spending the extra $40 on whisky too...
E
Eusebio06
08-15-2022, 02:57 AM #17

Got it, sending back the Noctua and placing the AK620 order. Spending the extra $40 on whisky too...

T
tazzer2000
Junior Member
2
08-20-2022, 05:59 PM
#18
Set up the AK620 yet. Need the PBO tuner to prevent it from throttling. It’ll exceed 85°C during an R23 run. Well, at least we have a fix.
T
tazzer2000
08-20-2022, 05:59 PM #18

Set up the AK620 yet. Need the PBO tuner to prevent it from throttling. It’ll exceed 85°C during an R23 run. Well, at least we have a fix.

O
oOEmmaOo
Posting Freak
818
08-21-2022, 01:30 AM
#19
This review is quite unusual. The cooler maintains a temperature of 75°C with a noise limit of 35dBA, and it performs better than the Noctua model. What model is this?
O
oOEmmaOo
08-21-2022, 01:30 AM #19

This review is quite unusual. The cooler maintains a temperature of 75°C with a noise limit of 35dBA, and it performs better than the Noctua model. What model is this?

D
DreamDragon
Member
201
08-22-2022, 04:09 PM
#20
Used a Masterbox Q300L with an open case and adjusted the front for better airflow. Overheating doesn’t seem to be caused by the case.
D
DreamDragon
08-22-2022, 04:09 PM #20

Used a Masterbox Q300L with an open case and adjusted the front for better airflow. Overheating doesn’t seem to be caused by the case.

Pages (2): Previous 1 2