Experience delays or performance drops with this processor.
Experience delays or performance drops with this processor.
Typically the voltage is a bit high but not too critical since the board will drop the supply when the CPU is under load. The DRAM was configured at certain voltages, and the SOC voltage was also important. That’s a notable overclock. Would you like me to run Memtest86 to check for RAM issues? Try reducing the clock to 2666 and see how it performs.
You can continue with the remaining runs; they’re likely necessary for a thorough check.
All assessments finished successfully with no issues detected. I adjusted the voltage and clock speed to 1.30V at 2666MHz.
Yes, you can adjust the FCLK in the BIOS settings. It is typically visible through HWiNFO if your system supports it. The FCLK may occasionally change due to various factors like power stability or temperature.
The system didn’t show any stuttering yet; I’ll monitor the next few hours. As I mentioned, it did stutter even at 2133MHz with standard voltage. I should be able to adjust it in BIOS, but it doesn’t change noticeably in HWiNFO.
I thought FCLK and MCLK were losing sync because FCLK decreased during power-saving mode. Noticing significant delay, I resolved it by adjusting FCLK in the BIOS and avoiding auto-setting it.