F5F Stay Refreshed Hardware Desktop Executing Ryzen 7 3700X under high performance conditions

Executing Ryzen 7 3700X under high performance conditions

Executing Ryzen 7 3700X under high performance conditions

Pages (2): Previous 1 2
K
KnightKing51
Member
170
08-30-2022, 10:03 AM
#11
I managed well with undervolting and overclocking my 3600. I run at 4.2ghz all cores @ 1.17V for F@H to maintain temperatures around 55°C, and I've stayed steady at 4.4ghz all cores @ 1.32 gaming (56°C max, usually lower). I'm not stable above 4.35ghz for F@H or blender with a comfortable voltage setting.
K
KnightKing51
08-30-2022, 10:03 AM #11

I managed well with undervolting and overclocking my 3600. I run at 4.2ghz all cores @ 1.17V for F@H to maintain temperatures around 55°C, and I've stayed steady at 4.4ghz all cores @ 1.32 gaming (56°C max, usually lower). I'm not stable above 4.35ghz for F@H or blender with a comfortable voltage setting.

B
BreannaJ
Member
59
08-30-2022, 10:24 AM
#12
I removed all panels and it had a noticeable effect—about four or five degrees lower. I also did a manual test with OC and achieved all cores at 4.2ghz at 1.225v. Under stress, panel temperatures stayed below 78°C, usually around 77°C most of the time. That’s significantly better than before. When I enabled auto precision boost, Ryzen Master aimed for around 1.4v ±0.5v with a boost of 4.1 to 4.2ghz. That’s why my temps were so high.
B
BreannaJ
08-30-2022, 10:24 AM #12

I removed all panels and it had a noticeable effect—about four or five degrees lower. I also did a manual test with OC and achieved all cores at 4.2ghz at 1.225v. Under stress, panel temperatures stayed below 78°C, usually around 77°C most of the time. That’s significantly better than before. When I enabled auto precision boost, Ryzen Master aimed for around 1.4v ±0.5v with a boost of 4.1 to 4.2ghz. That’s why my temps were so high.

M
marzing22
Member
191
09-04-2022, 09:15 PM
#13
Honestly, even though the case has glass panels, there is a relatively significant gap around all of the panels. It really dosent make much difference with all panels on vs off. I feel that if you have 6 fans in it, it defenitly has adequate airflow.
M
marzing22
09-04-2022, 09:15 PM #13

Honestly, even though the case has glass panels, there is a relatively significant gap around all of the panels. It really dosent make much difference with all panels on vs off. I feel that if you have 6 fans in it, it defenitly has adequate airflow.

Pages (2): Previous 1 2