F5F Stay Refreshed Hardware Desktop Exciting and thrilling experience!

Exciting and thrilling experience!

Exciting and thrilling experience!

Pages (3): 1 2 3 Next
A
aloyark
Member
161
05-02-2016, 12:49 PM
#1
your 3200mhz ram struggles because of other components slowing it down. the shutdown happens when you try to hit 2666mhz, which suggests something is restricting performance. check your power supply and cooling—high wattage or poor airflow can cap speeds. also verify the ram module compatibility and ensure no overheating issues are present.
A
aloyark
05-02-2016, 12:49 PM #1

your 3200mhz ram struggles because of other components slowing it down. the shutdown happens when you try to hit 2666mhz, which suggests something is restricting performance. check your power supply and cooling—high wattage or poor airflow can cap speeds. also verify the ram module compatibility and ensure no overheating issues are present.

Y
YouriiruoY
Member
212
05-02-2016, 02:22 PM
#2
Activate DOCP in the BIOS settings.
Y
YouriiruoY
05-02-2016, 02:22 PM #2

Activate DOCP in the BIOS settings.

E
Ender_kat22
Member
171
05-02-2016, 02:48 PM
#3
Been there he's done that, he should have mentioned it because now he'll get all the same responses as last time.. If this is a NEW PC, return it,... for the Motherboard not supporting your memory. (Or see if swapped memory works (another 3200 kit)
E
Ender_kat22
05-02-2016, 02:48 PM #3

Been there he's done that, he should have mentioned it because now he'll get all the same responses as last time.. If this is a NEW PC, return it,... for the Motherboard not supporting your memory. (Or see if swapped memory works (another 3200 kit)

S
SuperFlash2016
Junior Member
32
05-15-2016, 08:30 AM
#4
The memory controller operates at a maximum of 2933mhz. It isn't a Zen2 chip.
S
SuperFlash2016
05-15-2016, 08:30 AM #4

The memory controller operates at a maximum of 2933mhz. It isn't a Zen2 chip.

S
SnowBottom7
Junior Member
13
05-15-2016, 03:29 PM
#5
It seems like you're questioning whether the motherboard might be defective. Would you like to share more details about the issue?
S
SnowBottom7
05-15-2016, 03:29 PM #5

It seems like you're questioning whether the motherboard might be defective. Would you like to share more details about the issue?

F
63
05-24-2016, 06:32 AM
#6
This frequency is too low for me to handle.
F
flowerlover326
05-24-2016, 06:32 AM #6

This frequency is too low for me to handle.

C
chapi89
Member
193
05-25-2016, 09:59 PM
#7
Change the system settings to the default configuration and refresh the data.
C
chapi89
05-25-2016, 09:59 PM #7

Change the system settings to the default configuration and refresh the data.

A
Athyu_
Junior Member
1
05-27-2016, 04:10 AM
#8
You’ve already updated the BIOS multiple times, but it’s still running the newest version—consider reinstalling it for consistency.
A
Athyu_
05-27-2016, 04:10 AM #8

You’ve already updated the BIOS multiple times, but it’s still running the newest version—consider reinstalling it for consistency.

G
gui1go
Member
177
05-27-2016, 05:52 AM
#9
It's tough to say, but you should send it back if possible and let them handle the testing first. It's obvious it won't start at normal speeds, and they should be aware of this right away. You should also make sure they're informed so they can address it immediately.
G
gui1go
05-27-2016, 05:52 AM #9

It's tough to say, but you should send it back if possible and let them handle the testing first. It's obvious it won't start at normal speeds, and they should be aware of this right away. You should also make sure they're informed so they can address it immediately.

N
NinoFY
Member
164
05-27-2016, 05:36 PM
#10
You're hitting a roadblock. A redo won't help much. Are you arranging the timing or allowing the board to decide? Do you have screenshots?
N
NinoFY
05-27-2016, 05:36 PM #10

You're hitting a roadblock. A redo won't help much. Are you arranging the timing or allowing the board to decide? Do you have screenshots?

Pages (3): 1 2 3 Next