Exchange the external hard drive with another one.
Exchange the external hard drive with another one.
You’ve transferred your entire boot setup using Macrium Reflect, but it’s not recognizing the new SSD. Double-check that the drive is properly formatted and that the BIOS settings match the new hardware. Ensure you’re using the correct boot order in BIOS/UEFI. Also, verify that no files were accidentally deleted or corrupted during the transfer. If the issue persists, consider reinstalling the OS from a clean image to rule out corruption.
Sure thing! Just copy the entire boot drive onto the new SSD, then unplug the old one before plugging it back in. After installation, verify the files are present. Once everything is set, reinstall the old drive and choose to boot from the new one. If you can't find the right drive, wait until the system boots with the new drive first. After that, clean the old drive using Windows Disk Management and reformat it with NTFS. Let me know if you need more help!
I followed your instructions and removed the old storage devices. After restarting, the system reported it couldn’t locate any operating system. It’s asking for a working drive or similar. When I tried connecting my old drive again, the same issue persisted. I’m unsure what I did wrong but the computer won’t boot now. I’m considering a clean installation but prefer to avoid that if possible.
I'm unsure about what actions I took when all drives were connected; it just shows an error saying the operating system wasn't found. Try removing any drives without an OS, as I did with the boot drive. When disconnecting everything except my M.2 (which should have one), it still reports the same issue. Connecting other drives prompts a reboot or boot selection. I can't get it to start like before, so I'm considering a clean Windows install.
It seems the transfer went wrong. You’ll probably need to handle everything by hand, good luck!
happened to find a USB stick that was working on another computer, which really helped speed things up. it booted up quickly—within seconds—and now I can launch Chrome in just 10 to 15 seconds. i’m also working on combining my two hard drives into one spanned volume so everything stays organized, but it’s been taking a long time.
You didn’t transfer the drive properly and overlooked the EUFI partition. Simply moving files to another drive won’t work. Windows is much more complex than that. Use a tool that can fully clone the partitions or reinstall your OS onto the new drive for a fresh setup with a new layout. You won’t be able to boot from the new drive until it’s properly installed.