F5F Stay Refreshed Hardware Desktop Excessive heat pad usage is problematic.

Excessive heat pad usage is problematic.

Excessive heat pad usage is problematic.

Pages (3): 1 2 3 Next
T
194
07-11-2016, 11:04 AM
#1
I chose to wipe down my fan and heatsink, but upon first putting in the CPU I realized a lot of thermal paste was applied. Now I’m worried about reapplying it during cleaning and possibly pushing it back into the socket. Any guidance would be helpful.
T
ThiLellesGames
07-11-2016, 11:04 AM #1

I chose to wipe down my fan and heatsink, but upon first putting in the CPU I realized a lot of thermal paste was applied. Now I’m worried about reapplying it during cleaning and possibly pushing it back into the socket. Any guidance would be helpful.

S
SkyInsane
Senior Member
718
07-15-2016, 11:46 PM
#2
Yes, you can detach the CPU from the socket and remove it from the area around it.
S
SkyInsane
07-15-2016, 11:46 PM #2

Yes, you can detach the CPU from the socket and remove it from the area around it.

P
peter4everpan
Member
235
07-16-2016, 06:07 AM
#3
You threw a ton of thermal paste into a gallon! Seriously, that’s a lot. Just clean it up normally—no need to mess around. If you’re not into cleaning it up, leave it alone.
P
peter4everpan
07-16-2016, 06:07 AM #3

You threw a ton of thermal paste into a gallon! Seriously, that’s a lot. Just clean it up normally—no need to mess around. If you’re not into cleaning it up, leave it alone.

S
SmileFaced
Junior Member
40
08-02-2016, 11:08 AM
#4
I believe you're mixing up resetting a CPU with reinstalling an integrated heat sink after removing it. This process is more challenging and raises some concerns. Removing the CPU carefully and then reinserting it isn’t necessarily problematic, but getting paste into the socket is a bigger worry. Your main issue seems to be avoiding residue when taking it out. I recommend using strong alcohol that’s at least 90% proof to clean the chipset gently. Begin at the edges and work inward, directing the cleaning solution toward the center of the heatsink. Apply it at an angle and move upward to prevent the paste from settling at the bottom. Use non-fibrous paper towels—avoid toilet paper which can tear easily. I’ve heard coffee filters can help, though I haven’t tried them yet. You should be fine cleaning it without trouble.
S
SmileFaced
08-02-2016, 11:08 AM #4

I believe you're mixing up resetting a CPU with reinstalling an integrated heat sink after removing it. This process is more challenging and raises some concerns. Removing the CPU carefully and then reinserting it isn’t necessarily problematic, but getting paste into the socket is a bigger worry. Your main issue seems to be avoiding residue when taking it out. I recommend using strong alcohol that’s at least 90% proof to clean the chipset gently. Begin at the edges and work inward, directing the cleaning solution toward the center of the heatsink. Apply it at an angle and move upward to prevent the paste from settling at the bottom. Use non-fibrous paper towels—avoid toilet paper which can tear easily. I’ve heard coffee filters can help, though I haven’t tried them yet. You should be fine cleaning it without trouble.

B
Bonnibel
Posting Freak
794
08-02-2016, 12:42 PM
#5
I believe you submerged it, have you attempted CPR?
B
Bonnibel
08-02-2016, 12:42 PM #5

I believe you submerged it, have you attempted CPR?

R
RossApro
Member
59
08-05-2016, 06:21 PM
#6
Good news on the status, but the issue persists. I completely removed the CPU and cleaned everything again, yet the red warning light remains. It seems there might be a problem with the CPU itself or the motherboard. No other boards are available for testing, and I don’t have another CPU to try. Please let me know if you need guidance on further troubleshooting steps.
R
RossApro
08-05-2016, 06:21 PM #6

Good news on the status, but the issue persists. I completely removed the CPU and cleaned everything again, yet the red warning light remains. It seems there might be a problem with the CPU itself or the motherboard. No other boards are available for testing, and I don’t have another CPU to try. Please let me know if you need guidance on further troubleshooting steps.

P
ProTimmy
Member
123
08-14-2016, 05:22 AM
#7
What have you tried? Don't let me know if you took out the IHS.
P
ProTimmy
08-14-2016, 05:22 AM #7

What have you tried? Don't let me know if you took out the IHS.

B
Bamlak_Bekele
Member
63
08-14-2016, 05:30 AM
#8
I didn’t do that. I took the CPU out of its socket. I cleaned it up, and some thermal paste spilled around the socket during the first installation. I put it back in place and reattached the heatsink. When I turned on my PC, there was no video output—just a red warning light indicating an issue with the CPU. After re-socketing the CPU, nothing happened.
B
Bamlak_Bekele
08-14-2016, 05:30 AM #8

I didn’t do that. I took the CPU out of its socket. I cleaned it up, and some thermal paste spilled around the socket during the first installation. I put it back in place and reattached the heatsink. When I turned on my PC, there was no video output—just a red warning light indicating an issue with the CPU. After re-socketing the CPU, nothing happened.

M
Mig56
Member
53
08-14-2016, 10:08 AM
#9
Where precisely did it happen?
M
Mig56
08-14-2016, 10:08 AM #9

Where precisely did it happen?

W
Winkler1212
Member
172
08-16-2016, 03:28 AM
#10
Use rubbing alcohol and a coffee filter to wipe it clean
W
Winkler1212
08-16-2016, 03:28 AM #10

Use rubbing alcohol and a coffee filter to wipe it clean

Pages (3): 1 2 3 Next