F5F Stay Refreshed Power Users Networks Examining Powerline Adapters

Examining Powerline Adapters

Examining Powerline Adapters

Pages (2): 1 2 Next
H
Heroteddy
Member
203
12-20-2016, 04:40 PM
#1
Hey there, so your router isn’t working properly on both floors of the house. The landlord doesn’t have an Ethernet cable going up the stairs, which makes sense. You’re trying to boost your internet while streaming to Twitch while gaming, which is a tough situation. I came across Powerline Adapters and thought about getting one to see if it helps. But there are a few things to consider: first, some adapters won’t interfere with other devices on the same circuit, so you’ll want to pick one that doesn’t take over the whole outlet. Second, both Powerline and DLink models need to be connected to the same circuit—you’ll need to check which circuits are active in different rooms. Third, I’m curious about the main differences between these two types of adapters without breaking the bank. Any tips would be super helpful!
H
Heroteddy
12-20-2016, 04:40 PM #1

Hey there, so your router isn’t working properly on both floors of the house. The landlord doesn’t have an Ethernet cable going up the stairs, which makes sense. You’re trying to boost your internet while streaming to Twitch while gaming, which is a tough situation. I came across Powerline Adapters and thought about getting one to see if it helps. But there are a few things to consider: first, some adapters won’t interfere with other devices on the same circuit, so you’ll want to pick one that doesn’t take over the whole outlet. Second, both Powerline and DLink models need to be connected to the same circuit—you’ll need to check which circuits are active in different rooms. Third, I’m curious about the main differences between these two types of adapters without breaking the bank. Any tips would be super helpful!

C
CiscoMiner
Senior Member
500
12-20-2016, 10:17 PM
#2
When your two connection points are on opposite sides of your home, avoid using Powerline. The performance won't be very high.
C
CiscoMiner
12-20-2016, 10:17 PM #2

When your two connection points are on opposite sides of your home, avoid using Powerline. The performance won't be very high.

J
Jerry_V_419
Junior Member
10
12-21-2016, 04:35 AM
#3
You should consider the safety and impact on other devices. Plugging your FIOS modem directly into an Ethernet port is generally safe, but ensure it’s properly secured and not interfering with nearby equipment. Since other users have consoles, verify that your connection speed won’t interfere with their performance.
J
Jerry_V_419
12-21-2016, 04:35 AM #3

You should consider the safety and impact on other devices. Plugging your FIOS modem directly into an Ethernet port is generally safe, but ensure it’s properly secured and not interfering with nearby equipment. Since other users have consoles, verify that your connection speed won’t interfere with their performance.

V
Vichoflo
Senior Member
396
12-22-2016, 09:13 PM
#4
If that’s all you have, I’d install a switch near the modem using an Ethernet cable for your PC. Add a router there and link your computer to it.
V
Vichoflo
12-22-2016, 09:13 PM #4

If that’s all you have, I’d install a switch near the modem using an Ethernet cable for your PC. Add a router there and link your computer to it.

G
GanonCannon
Member
177
12-24-2016, 09:16 PM
#5
This switch will turn off the other router when you activate it.
G
GanonCannon
12-24-2016, 09:16 PM #5

This switch will turn off the other router when you activate it.

D
Dual_Wielder_
Junior Member
14
12-25-2016, 05:33 AM
#6
You could notice a solid upgrade if you connect the one upstairs with wiring, but wireless won’t work. The TP-Link av1200 seems to be the model many people have tried and succeeded with. They don’t have to share the same circuit, and the TP-Link ones include an extra outlet so you won’t worry about blocking it. There’s also a 3-port gigabit switch for around $80—worth considering.
D
Dual_Wielder_
12-25-2016, 05:33 AM #6

You could notice a solid upgrade if you connect the one upstairs with wiring, but wireless won’t work. The TP-Link av1200 seems to be the model many people have tried and succeeded with. They don’t have to share the same circuit, and the TP-Link ones include an extra outlet so you won’t worry about blocking it. There’s also a 3-port gigabit switch for around $80—worth considering.

A
Aduma
Member
51
12-25-2016, 09:17 AM
#7
It seems there isn’t a router in the upper floor right now. The only one available is on the lower level.
A
Aduma
12-25-2016, 09:17 AM #7

It seems there isn’t a router in the upper floor right now. The only one available is on the lower level.

E
endrup_GVDK
Junior Member
12
12-26-2016, 12:23 PM
#8
Refer to the document above for the completed version.
E
endrup_GVDK
12-26-2016, 12:23 PM #8

Refer to the document above for the completed version.

W
Will_Nei
Member
142
12-26-2016, 04:23 PM
#9
I believe we're discussing the ONT setup. If true, the Ethernet port might not function properly. Switching seems unlikely since the ONT likely doesn't handle NAT. A switch would probably work if the user has coaxial cable and a router, allowing them to use MOCA adapters. These support faster speeds than power line adapters, though they cost around $160 for two unbonded units—good for up to 400 Mbps. Bonded adapters can reach up to 800 Mbps, but they're pricier. The main drawback of MOCA is higher latency and half-duplex operation, similar to WiFi, meaning only one-way communication at a time.
W
Will_Nei
12-26-2016, 04:23 PM #9

I believe we're discussing the ONT setup. If true, the Ethernet port might not function properly. Switching seems unlikely since the ONT likely doesn't handle NAT. A switch would probably work if the user has coaxial cable and a router, allowing them to use MOCA adapters. These support faster speeds than power line adapters, though they cost around $160 for two unbonded units—good for up to 400 Mbps. Bonded adapters can reach up to 800 Mbps, but they're pricier. The main drawback of MOCA is higher latency and half-duplex operation, similar to WiFi, meaning only one-way communication at a time.

O
OreoPro124420
Member
199
12-26-2016, 06:54 PM
#10
The coax cable entering your space is shared with the router upstairs, which uses coax for connectivity. This setup could affect performance if interference occurs. Streaming or gaming might suffer due to signal quality.
O
OreoPro124420
12-26-2016, 06:54 PM #10

The coax cable entering your space is shared with the router upstairs, which uses coax for connectivity. This setup could affect performance if interference occurs. Streaming or gaming might suffer due to signal quality.

Pages (2): 1 2 Next